VSIB10A20-E3/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes, also known as rectifier diodes, are commonly used in power supplies and are the most widely used type of diode. Bridge rectifier diodes, or bridge rectifiers, are a type of diode used for converting alternating current (AC) to direct current (DC). The most popular type of bridge rectifier diode is the VSIB10A20-E3/45.

Applications

The VSIB10A20-E3/45 is typically used in power supplies as well as other applications like rectification of single-phase AC power. It is suitable for applications where the peak forward current is greater than 10A and the continuous forward current is less than 8A. In addition, it can also be used in half bridge topologies and capacitive or resistive loads.

Working Principle

The bridge rectifier consists of four diodes connected in a full-wave configuration. Under the application of an AC voltage, the electric current forms a closed loop and cycles through the four diodes twice within each cycle. This results in a DC output that is twice the frequency of the input AC voltage.

When the incoming positive voltage is greater than the outgoing negative voltage, two diodes are forward-biased and two are reversed-biased. As a result, the current in the circuit flows from the positive voltage, and then through the two forward-biased diodes, into the center node, and then through the two reversed-biased diodes back to the negative voltage. When the incoming negative voltage is greater than the outgoing positive voltage, the two reversed-biased diodes are forward-biased and the two forward-biased diodes are reversed-biased. Therefore, the current flows opposite the previous direction, i.e., from the negative voltage, through the two forward-biased diodes, into the center node and then through the two reversed-biased diodes back to the positive voltage. This constant back and forth current flow forms the rectified DC output at the center node of the bridge rectifier.

Characteristics

The VSIB10A20-E3/45 bridge rectifier is designed for use in power supplies and other applications like switching power supplies. It has a very low reverse leakage current and high surge handling capacity. Its low forward voltage drop over a wide range of operating temperatures ensures that the device operates with maximum efficiency. Its forward current rating of 10A and reverse voltage rating of 45V makes it ideal for most power applications. It has a maximum operating temperature of 125°C, so it can be used in high temperature environments. This device also has a low profile design that makes it easy to mount.

Conclusion

The VSIB10A20-E3/45 bridge rectifier is a popular choice for rectification applications, due to its low forward voltage drop, low reverse leakage current, high surge handling capacity and low profile design. It is suitable for applications where the peak forward current is greater than 10A and the continuous forward current is less than 8A. Its versatility makes it a great choice for power supplies and other applications requiring AC to DC conversion.

The specific data is subject to PDF, and the above content is for reference