VUO25-12NO8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers are popular electrical components that perform the vital function of rectifying alternating current (AC) into direct current (DC). The VUO25-12NO8 model is a single-phase, four-diode silicon bridge rectifier, which can withstand a high voltage of up to 800 volts. Utilizing diodes and a bridge design, it is used as a versatile replacement for traditional two-diode rectifiers and is suitable for high power applications, such as power supplies, inverters, speakers, and motors.

The device is equipped with four individual diodes encased in a ceramics material with good thermal conductivity and a mica sheet which provides the necessary insulation. The diodes are polarized and arranged in a bridge configuration. The anode of each diode is connected to alternating current (AC) terminals, while the cathodes are connected to direct current (DC) terminals. During an AC cycle, when the anode reaches a higher voltage then the cathode, the diode conducts current while the opposite occurs when the cathode has a higher voltage than the anode, which creates a so-called ‘reverse-biased diode’. Thus, depending on the polarity of the voltage across it, each diode acts as either a switch or a resistor.

The bridge rectifier, as its name implies, bridges the gap between AC power and the DC power current it\'s going to be used for. As current passes through the four diodes, it is ‘chopped up’, rectified and then condensed into one superpower - the DC output. This rectification process occurs twice per AC cycle, producing a steady DC voltage, yet with some ripple interference caused by imperfect rectification. The VUO25-12NO8 can be connected to an AC power source varying between 220 to 440 volts and is designed with a rated current of 25 amperes.

One of the advantages of the diode bridge system is that it provides a full-wave rectification of AC power, making it easier to convert the AC supply into DC. This bridge rectifier is even suitable for circuits with two vacuum tubes. Furthermore, the ceramic-based construction allows for excellent thermal insulation and the VUO25-12NO8 is fitted with a metal casing for protection of the device and improved safety. It can be used in applications where a high-power rectifying element is needed, such as in an automobile\'s battery charger, audio amplifiers, power supply unit, voltage regulators, motor controllers, and other DC-motor driven circuits.

With its robust design and the ability to withstand a wide range of operating conditions, the VUO25-12NO8 bridge rectifier is a reliable and convenient choice for those seeking an effective rectification solution. Featuring an ultra-low thermal resistance and a low forward voltage drop, its performance is reliable even when subjected to temperatures up to 150℃. The VUO25-12NO8 also offers excellent protection against electrical shocks and overloads, making it perfectly suitable for high power applications.

The specific data is subject to PDF, and the above content is for reference