VUO28-08NO7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bridge Rectifiers are made up of four or more diodes connected in an alternating polarity configuration to create a full-wave AC current. The VUO28-08NO7 is a small 4-lead, single-phase full-wave bridge rectifier, which is especially suitable for battery operated applications due to its low forward voltage drop (Vf) and high efficiencies (η).

The structure of the VUO28-08NO7 bridge rectifier is composed of two anode leads, one common cathode lead, and one auxiliary lead for the external connection of a diode. The anode leads are connected to the two input AC lines, while the aux lead is connected to the cathode of an additional diode. This additional diode is used to reduce the voltage drop across the two input AC lines during peak current flow. The two diodes connected to the anode are known as the main diodes, and the two connected to the cathode are called the bypass or shunt diodes.

The working principle of the VUO28-08NO7 bridge rectifier is based on the fact that diodes block current in one direction and allow it to pass in the other. When two AC lines are connected to the VUO28-08NO7 bridge rectifier, phase A is connected to the cathode of the main diode and phase B is connected to the anode of the main diode. During the negative half-cycle of the AC input, the main diode is reverse biased and hence does not conduct. On the other hand, during the positive half-cycle, the diode is forward biased and hence conducts.

The reversed biased shunt diode conducts when the voltage of the two AC lines is higher than the voltage of the bypass diode. This prevents the voltage of the two AC lines from increasing beyond the diode\'s breakdown voltage. The bypass diode acts to reduce the voltage drop across the two AC lines when the rectifier is operating at peak current flow. This enables the rectifier to deliver maximum power efficiency. The auxiliary lead can be used to connect an additional diode to form a full-wave bridge rectifier with four diodes.

The VUO28-08NO7 bridge rectifier is designed for use in battery operated systems and other AC/DC systems that require high-efficiency operation. Due to its low forward voltage drop and high efficiencies, the VUO28-08NO7 is capable of delivering maximum power output with minimal losses. It is also suitable for use in a variety of other circuits, such as voltage-doubling rectifiers, buck-type switching power supplies, switching voltage regulators, and others.

In conclusion, the VUO28-08NO7 bridge rectifier is a 4-lead, single-phase full-wave bridge rectifier, especially suitable for battery operated applications due to its low forward voltage drop and high efficiencies. Its working principle is based on the fact that diodes block current in one direction and allow it to pass in the other, while its auxiliary lead enables the connection of an additional diode to form a full-wave bridge rectifier with four diodes. The VUO28-08NO7 can be used in a variety of AC/DC systems that require high-efficiency operation, such as voltage-doubling rectifiers, buck-type switching power supplies, and switching voltage regulators.

The specific data is subject to PDF, and the above content is for reference