Allicdata Part #: | 1278-1009-ND |
Manufacturer Part#: |
W5300 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | WIZnet |
Short Description: | IC CONTROLLER ETHERNET 100LQFP |
More Detail: | Ethernet Controller 10/100 Base-T/TX PHY Parallel ... |
DataSheet: | W5300 Datasheet/PDF |
Quantity: | 5000 |
Series: | -- |
Packaging: | Tray |
Part Status: | Active |
Protocol: | Ethernet |
Function: | Controller |
Interface: | Parallel |
Standards: | 10/100 Base-T/TX PHY |
Voltage - Supply: | 3 V ~ 3.6 V |
Current - Supply: | 5mA |
Operating Temperature: | -40°C ~ 80°C |
Package / Case: | 100-LQFP |
Supplier Device Package: | 100-LQFP (14x14) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction:
W5300 is an interface controller powered by Ethernet and is used for pairing two-wire protocols with Ethernet networks. The purpose of this article is to provide an overview of the application field and working principle of the W5300.
Application Fields of W5300:
The W5300 can be used in a variety of applications, including:
- Industrial automation
- Building automation
- RGB lighting control and monitoring
- Medical instrumentation
- Heating, ventilation, and air conditioning (HVAC) systems
- Robotics systems
In all these applications, the W5300 can provide reliable and secure connection between the Ethernet networks and industrial and consumer products.
Technical Specifications:
The W5300 is an Ethernet controller with 8-bit performance and 8-bit data width. It has a maximum clock frequency of 50MHz and a maximum data transfer rate of 100Kbps. The controller is also equipped with a variety of power management features, such as automatic power-up reset and sleep mode. The W5300 is compatible with the standard IEEE 802.3 802.3u protocols, making it suitable for use in most Ethernet networks.
Working Principle of W5300:
The W5300 is designed to facilitate the communication between two-wire devices and Ethernet networks. It can be used in applications where data is sent from one end of the network to the other. The controller works by transmitting and receiving data through a pair of ports - an input port and an output port. Data is sent to the W5300 via the input port, where it is processed and then transmitted to the other end of the network via the output port. This ensures that data is sent only when needed, reducing the amount of traffic on the network.
The W5300 can also be used to facilitate the communication between two Ethernet networks. In this case, the controller is used to bridge the networks and allow data to be exchanged between the networks. This type of communication is known as bridging.
Conclusion:
The W5300 is an Ethernet controller designed for pairing two-wire protocols with Ethernet networks. It is a reliable and secure interface controller which can be used in a variety of applications, including industrial automation, building automation, RGB lighting control and monitoring, medical instrumentation, HVAC systems, and robotics systems. The controller is compatible with the IEEE 802.3u and 802.3 protocols and works by transmitting and receiving data through a pair of ports - an input port and an output port.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
W5300 | WIZnet | -- | 5000 | IC CONTROLLER ETHERNET 10... |
IC UART TXRX 128/384 BYTE 16QFNUSB Bridg...
IC CONTROLLER USB 36QFNUSB Hub Controlle...
IC CONTROLLER ETHERNET 48SSOPEthernet Ph...
IC USB PWR CTRLR DUAL 8-SOICUSB Controll...
IC LINK LAYER CONTROLLER 176-BGAIEEE 139...
IC UART DUAL I2C/SPI 32-HVQFNRS232, RS48...