WA04P009XCTL RF/IF and RFID |
|
Allicdata Part #: | 1292-1056-2-ND |
Manufacturer Part#: |
WA04P009XCTL |
Price: | $ 0.02 |
Product Category: | RF/IF and RFID |
Manufacturer: | Walsin Technology Corporation |
Short Description: | ATTENUATOR 9DB 50 OHM 0404 |
More Detail: | RF Attenuator 9dB ±0.4dB 0Hz ~ 3GHz 50 Ohms 100mW ... |
DataSheet: | WA04P009XCTL Datasheet/PDF |
Quantity: | 1000 |
10000 +: | $ 0.01880 |
30000 +: | $ 0.01828 |
50000 +: | $ 0.01769 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Attenuation Value: | 9dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 100mW |
Impedance: | 50 Ohms |
Package / Case: | 0404 (1010 Metric), Concave |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic circuits designed to reduce the power of a signal by a predetermined amount, and are popular tools in the electronics field. WA04P009XCTL is one such example. With different versions for different frequencies and full-duplex capabilities, it offers a wide range of applications and working principles.
One of the most common applications of the WA04P009XCTL is in radio transmitters, where it is used to reduce the amplitude of a signal before it is sent out over the airwaves. This reduces the amount of interference that the signal will cause on other nearby signals and makes communication easier. The attenuator works like a variable resistor; as the resistance of the attenuator increases, less power is transmitted. Similarly, as the resistance decreases, more power is transmitted.
The attenuator can also be used to reduce the power of a signal going into a receiver. This is especially useful when the signal is too strong, as it can cause saturation of the receiver. The attenuator works by reducing the amplitude of the signals going into it, resulting in a weaker signal that can better be handled by the receiver. This is often used when two or more receivers are close together, to ensure that they do not interfere with each other.
In addition to its application in radio transmission, the WA04P009XCTL attenuator can also be used in communications and networking systems. It is especially useful for reducing the power of interfering signals so that higher bandwidth can be achieved. This is especially useful in cellular networks, where tension between base stations and cellular phones can be reduced by using an attenuator. In addition, radio links are also heavily reliant on attenuators to reduce the power of interfering signals and improve system performance.
The attenuator also has applications in audio systems. By reducing the power of the signal from an amplifier, it can increase the clarity of the sound. This is especially useful in home audio systems, where the signal can be overdriven and distorted if not properly attenuated.
The WA04P009XCTL is a full-duplex system, meaning that it can transmit and receive signals simultaneously. This is useful in applications such as data transmission, where it is necessary to transmit and receive data at the same time. The system works by amplifying a weak signal sent through the attenuator and then sending it through to the receiver. This reduces the need for multiple antennas, as only one is required to transmit and receive data.
In summary, the WA04P009XCTL is a versatile attenuator that can be used in a variety of applications. It can reduce the power of interfering signals and reduce the amount of noise generated, improve the clarity of audio, and increase the bandwidth of communications and networking systems. Thanks to its full-duplex capabilities, it also allows for simultaneous transmission and reception of data. With its wide range of applications and working principles, the WA04P009XCTL is a valuable tool in the electronics field.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WA04P012XDTL | Walsin Techn... | 0.02 $ | 10000 | ATTENUATOR 12DB 50 OHM 04... |
WA04PR05XATL | Walsin Techn... | 0.02 $ | 10000 | ATTENUATOR .5DB 50 OHM 04... |
WA04PR15XBTL | Walsin Techn... | 0.02 $ | 10000 | ATTENUATOR 1.5DB 50 OHM 0... |
WA04P008XCTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 8DB 50 OHM 040... |
WA04P015XFTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 15DB 50 OHM 04... |
WA04P001XBTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 1DB 50 OHM 040... |
WA04P019XGTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 19DB 50 OHM 04... |
WA04P017XGTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 17DB 50 OHM 04... |
WA04P018XGTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 18DB 50 OHM 04... |
WA04P003XBTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 3DB 50 OHM 040... |
WA04P011XDTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 11DB 50 OHM 04... |
WA04P009XCTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 9DB 50 OHM 040... |
WA04P014XETL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 14DB 50 OHM 04... |
WA04P004XBTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 4DB 50 OHM 040... |
WA04P005XBTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 5DB 50 OHM 040... |
WA04P020XHTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 20DB 50 OHM 04... |
WA04P016XFTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 16DB 50 OHM 04... |
WA04P000XPTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 0DB 50 OHM 040... |
WA04P010XCTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 10DB 50 OHM 04... |
WA04P006XCTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 6DB 50 OHM 040... |
WA04P007XCTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 7DB 50 OHM 040... |
WA04P002XBTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 2DB 50 OHM 040... |
WA04P013XDTL | Walsin Techn... | 0.02 $ | 1000 | ATTENUATOR 13DB 50 OHM 04... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...