WA04P019XGTL RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are devices used to reduce the strength of an electrical signal by a determined amount. This can be done manually, through different active components such as resistors, inductors, capacitors, transformers, and even semiconductors. WA04P019XGTL is a type of attenuator with an application field and working principle of its own.

The WA04P019XGTL is an attenuator that is built into a 9mm-sized, eight-pin surface-mount package. Because of its small size, it can be used in several applications such as high-speed telecommunications lines, radio broadcast systems, and information systems, to name a few. Additionally, it is suitable for applications where the signal to be attenuated has a frequency up to 10GHz.

The WA04P019XGTL is composed of two matched-section, high-linearity chips that use different input/output (I/O) impedance values and attenuator pads to provide a maximum attenuation of 32.5dB with a bandwidth of up to 10GHz. It also comes with an industrial temperature range of -40°C to 85°C.

The operational amplifier found in the WA04P019XGTL provides good linearity which represents the gain accuracy of the signal, reducing errors due to amplifier deviations. This improves the dynamic range and linearity of the attenuator. Additionally, the high-impedance terminals of the device reduce any parasitic loading effects on the signal. This is of particular importance in high frequency range applications.

In terms of working principle, the WA04P019XGTL attenuator makes use of an input signal and an attenuator control voltage. When the control voltage is applied, the circuit is activated, and the input signal is attenuated in proportion to the applied control voltage, thus reducing the amplitude and power of the signal.

To sum up, the WA04P019XGTL is an attenuator of small size and wide application. It is composed of two matched-section, high-linearity chips to provide a maximum attenuation of 32.5dB with a maximum bandwidth of 10GHz and an industrial temperature range of -40°C to 85°C. Furthermore, it makes use of an operational amplifier to improve linearity and reduce errors. Finally, its working principle is based on an input signal and attenuator control voltage.

The specific data is subject to PDF, and the above content is for reference