Allicdata Part #: | WHCR10FE-ND |
Manufacturer Part#: |
WHCR10FE |
Price: | $ 0.55 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 0.1 OHM 2W 1% AXIAL |
More Detail: | 100 mOhms ±1% 2W Through Hole Resistor Axial Wire... |
DataSheet: | WHCR10FE Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 0.50085 |
Tolerance: | ±1% |
Power (Watts): | 2W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±90ppm/°C |
Operating Temperature: | -55°C ~ 150°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.180" Dia x 0.449" L (4.57mm x 11.40mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Series: | WH |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 100 mOhms |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through hole resistors are commonly used in electronic circuits to reduce, limit, or eliminate voltage, current, or circuit power consumption. The WHCR10FE is a through-hole resistor designed for applications requiring high-voltage, high-temperature performance. The component is particularly suitable for use in power supplies, lighting systems, and other applications that need a reliable and precise current control.
The WHCR10FE Through Hole Resistor has a micro-porous, highly conductive coating that makes it suitable for high-voltage and high-power applications. The coating also improves temperature stability, reduces failure rate, and increases the component\'s durability. The design also features a thick coating layer, ensuring that the resistor will not warp or crack due to extreme temperatures.
The WHCR10FE Through Hole Resistor has a maximum operating voltage of 1000 volts, a maximum power dissipation of 10watts, and is capable of withstanding a reverse voltage of 5V. Its heat-dissipation rate is better than other commonly used resistors and its resistance-temperature coefficient is much better than that of other through-hole resistors.
The WHCR10FE Through Hole Resistor works by reducing, limiting, or eliminating the voltage, current, and power consumption of an electronic circuit. The resistor acts as a connection between two electrical conductors, forming an impedance or resistance. It is able to resist current flow, allowing the current and/or voltage of the circuit to remain constant. The resistor also acts as a protective device by limiting the current through the circuit in case of a short circuit.The WHCR10FE Through Hole Resistor also has the ability to reduce noise and distortion in a signal. The component can absorb and dissipate energy from the signal, smoothing out any irregularities and minimizing interference. This reduces the amount of noise present in the circuit and helps to ensure that the signal is of the highest quality. The WHCR10FE is a must-have component for any circuit that requires precision current control and noise reduction.
When selecting a through-hole resistor, it is important to consider the WHCR10FE. It offers reliable performance in high-voltage, high-power applications and is capable of withstanding a reverse voltage of 5V. Its temperature coefficient and heat-dissipation rate are also better than other resistors, allowing it to maintain its performance over time. In addition, the resistor absorbs and dissipates energy from a signal, minimizing noise and ensuring high-quality audio performance.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WHCR10FE | Ohmite | 0.55 $ | 1000 | RES 0.1 OHM 2W 1% AXIAL10... |
WHCR25FE | Ohmite | 0.55 $ | 1000 | RES 0.25 OHM 2W 1% AXIAL2... |
WHCR50FE | Ohmite | 0.55 $ | 1000 | RES 0.5 OHM 2W 1% AXIAL50... |
WHCR75FE | Ohmite | 0.55 $ | 1000 | RES 0.75 OHM 2W 1% AXIAL7... |
WHCR25FET | Ohmite | 0.25 $ | 1000 | RES 0.25 OHM 2W 1% AXIAL2... |
WHCR75FET | Ohmite | 0.25 $ | 1000 | RES 0.75 OHM 2W 1% AXIAL7... |
WHCR10FET | Ohmite | 0.25 $ | 1000 | RES 0.1 OHM 2W 1% AXIAL10... |
WHCR50FET | Ohmite | 0.25 $ | 1000 | RES 0.5 OHM 2W 1% AXIAL50... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...