WHCR10FET Resistors |
|
Allicdata Part #: | WHCR10FETR-ND |
Manufacturer Part#: |
WHCR10FET |
Price: | $ 0.25 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 0.1 OHM 2W 1% AXIAL |
More Detail: | 100 mOhms ±1% 2W Through Hole Resistor Axial Wire... |
DataSheet: | WHCR10FET Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.22145 |
2000 +: | $ 0.21645 |
5000 +: | $ 0.21229 |
10000 +: | $ 0.20729 |
Series: | WH |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 100 mOhms |
Tolerance: | ±1% |
Power (Watts): | 2W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±90ppm/°C |
Operating Temperature: | -55°C ~ 150°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.180" Dia x 0.449" L (4.57mm x 11.40mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are components that are designed to provide electrical resistance value in electronic circuits. They are used to adjust voltage, current, and power levels, as well as to provide a stable reference voltage.
WHCR10FET is a type of through hole resistor. It has many applications including high gain amplifiers, RF amplifiers, logic gates, and other circuits. This type of resistor is usually used to provide effective circuit protection from high energy transients, short circuits, and overvoltage conditions.
The working principle of WHCR10FET is based on passing an electric current through a resistor to generate a voltage drop across the resistor. This voltage drop is used to adjust the electrical current in the circuit, or to set the power output. As the current passes through the resistor, electrical energy is dissipated in the form of heat. The voltage drop changes according to the resistance value of the resistor.
The resistance value of the WHCR10FET resistor can be adjusted by changing the length and width of the resistor. It is also possible to adjust the value by using special springs, or by changing the number of turns of the resistor. The resistor also has the advantage of being able to keep a consistent resistance value, even when exposed to temperature and vibration.
The WHCR10FET is a highly durable and reliable Through Hole Resistor. It is a low-cost and versatile resistor that is suitable for high temperature, high frequency, and high voltage applications. It is also versatile enough to be used in a variety of circuits.
The WHCR10FET is a popular and widely used Through Hole Resistor. It can be used to provide circuit protection, to adjust voltage, current, and power levels, and to provide a stable reference voltage. Its high durability and reliability make it an excellent choice for many electronic applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WHCR10FE | Ohmite | 0.55 $ | 1000 | RES 0.1 OHM 2W 1% AXIAL10... |
WHCR25FE | Ohmite | 0.55 $ | 1000 | RES 0.25 OHM 2W 1% AXIAL2... |
WHCR50FE | Ohmite | 0.55 $ | 1000 | RES 0.5 OHM 2W 1% AXIAL50... |
WHCR75FE | Ohmite | 0.55 $ | 1000 | RES 0.75 OHM 2W 1% AXIAL7... |
WHCR25FET | Ohmite | 0.25 $ | 1000 | RES 0.25 OHM 2W 1% AXIAL2... |
WHCR75FET | Ohmite | 0.25 $ | 1000 | RES 0.75 OHM 2W 1% AXIAL7... |
WHCR10FET | Ohmite | 0.25 $ | 1000 | RES 0.1 OHM 2W 1% AXIAL10... |
WHCR50FET | Ohmite | 0.25 $ | 1000 | RES 0.5 OHM 2W 1% AXIAL50... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...