Allicdata Part #: | WOVT1-100-ND |
Manufacturer Part#: |
WOVT1-100 |
Price: | $ 0.69 |
Product Category: | Industrial Controls |
Manufacturer: | TE Connectivity Aerospace, Defense and Marine |
Short Description: | WOVT1-100=WILMAR OVERVOLTAGE R |
More Detail: | N/A |
DataSheet: | WOVT1-100 Datasheet/PDF |
Quantity: | 1000 |
5 +: | $ 0.63000 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Protection Relays & Systems helps protect people and their environments from any potential hazards of electricity. WOVT1-100 is a category of protection relays & systems used in various fields for protection against electrical accidents and maintaining general safety and security. This article will discuss the application fields of the WOVT1-100 and the working principle behind it.
The WOVT1-100 is commonly used in industrial settings where there is a potential of any electrical hazard. This system is mainly used for motor-driven machinery protection including pumps, compressors, fans, and chemical reactors. It is also used in the protection of overhead lines which can be exposed to extreme weather conditions and can cause some complications if not monitored properly. The WOVT1-100 can be used for medium voltage protection for transformers, busducts, cable shelf units, motors, and generators. The system can also be used in the protection of industrial processes which include the production of oil and gas and any other chemical processes. Finally, the WOVT1-100 is used in the protection of medium and low voltage switchgears.
The working principle for the WOVT1-100 is based on the detection of over-voltage and under-voltage using impedance-based differential protection system. When the system detects an overload or an over-voltage, it will trip the breaker before any damage to the equipment is done. To detect the over-voltage and under-voltage, the system has two main measurements; the differential current and the neutral current. The system monitors the difference between the two signals and if a trip signal is detected, the system will disconnect the supply. The system also comes with a range of settings which can be changed in order to adjust the sensitivity of the trip signal and the level of protection offered is in line with IEC standards.
The WOVT1-100 system is used widely in industrial settings for the protection of equipment against over-voltage and under-voltage. The system is designed in such a way that it offers reliable and effective protection against any potential electrical hazards. The sensitivity of the system can be adjusted for the protection of individual pieces of equipment or for the protection of a whole system. The system is highly efficient and can detect any overload or under-voltage in a matter of milliseconds and it is designed in accordance with IEC standards.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WOVT3-120 | TE Connectiv... | 649.0 $ | 1000 | WOVT3-120=WILMAR OVERVOLT... |
WOVT3-200 | TE Connectiv... | 674.31 $ | 1000 | WOVT3-200=WILMAR OVERVOLT... |
WOVT3-575 | TE Connectiv... | 0.69 $ | 1000 | WOVT3-575=WILMAR OVERVOLT... |
WOVT1-208 | TE Connectiv... | 0.69 $ | 1000 | WOVT1-208=WILMAR OVERVOLT... |
WOVT1-240 | TE Connectiv... | 0.69 $ | 1000 | WOVT1-240=WILMAR OVERVOLT... |
WOVT1-380 | TE Connectiv... | 0.69 $ | 1000 | WOVT1-380=WILMAR OVERVOLT... |
WOVT3-240 | TE Connectiv... | 0.69 $ | 1000 | WOVT3-240=WILMAR OVERVOLT... |
WOVT3-240-P | TE Connectiv... | 0.69 $ | 1000 | WOVT3-240-P=WILMAR OVERVO... |
WOVT3-208 | TE Connectiv... | 0.69 $ | 1000 | WOVT3-208=WILMAR OVERVOLT... |
WOVT1-120 | TE Connectiv... | 0.69 $ | 1000 | WOVT1-120=WILMAR OVERVOLT... |
WOVT1-100 | TE Connectiv... | 0.69 $ | 1000 | WOVT1-100=WILMAR OVERVOLT... |
WOVT3-480 | TE Connectiv... | 0.69 $ | 1000 | WOVT3-480=WILMAR OVERVOLT... |