WW12FB24R3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors play an important role in many electronic circuits. The WW12FB24R3 application field and working principles can be used to understand the essential characteristics of such components.

The WW12FB24R3 is a through hole resistor that has a wire-wound design. It is made up from a pair of wire coils, each wound around a ceramic core. The coil is wound in a tight bifilar pattern so that it can effectively dissipate heat and decrease the thermal resistance of the resistor. The ceramic core also has the advantage that it can store energy and therefore increase the power rating of the resistor.

The WW12FB24R3 has a nominal resistance of 12kOhms and a rated power of 24W. It is able to operate between a wide range of temperatures from -40°C to +105°C. The minimum and maximum allowable operating temperature is -55°C and +125°C respectively. This resistor is especially designed for use in high-temperature and high-stress environments.

The working principle of the WW12FB24R3 is relatively straightforward. As the current flows through the wire coils, it produces a voltage drop across the resistor due to the resistance of the material. This voltage drop can be measured with a multimeter. The value of the voltage drop is inversely proportional to the value of the resistance. The higher the resistance, the lower the voltage drop. Moreover, as the resistance decreases, the power rating of the resistor also decreases.

The WW12FB24R3 also has the advantage that it is fairly easy to install and replace. It is designed to be use with through-hole technology, where a hole is drilled into a circuit board. The resistor is then soldered onto the circuit board in order to make the necessary connections. This resistor is usually used for connecting signal traces, reducing the value of current signals, or for controlling the current flow in a circuit.

In summary, the WW12FB24R3 is a through hole resistor that has a wire-wound design and is rated for a power of 24W. It is specifically designed to be used in high-temperature and high-stress environments. The working principle of the resistor is relatively straightforward, as it produces a voltage drop due to the resistance of the material. Through-hole technology is used to install and replace this resistor and it is usually used for connecting signal traces, reducing the value of current signals, or for controlling the current flow in a circuit.

The specific data is subject to PDF, and the above content is for reference