| Allicdata Part #: | WW12FT11R8-ND |
| Manufacturer Part#: |
WW12FT11R8 |
| Price: | $ 0.15 |
| Product Category: | Resistors |
| Manufacturer: | Stackpole Electronics Inc. |
| Short Description: | RES 11.8 OHM 0.4W 1% AXIAL |
| More Detail: | 11.8 Ohms ±1% 0.4W Through Hole Resistor Axial Moi... |
| DataSheet: |  WW12FT11R8 Datasheet/PDF |
| Quantity: | 1000 |
| 2500 +: | $ 0.13019 |
Specifications
| Series: | WW |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Resistance: | 11.8 Ohms |
| Tolerance: | ±1% |
| Power (Watts): | 0.4W |
| Composition: | Wirewound |
| Features: | Moisture Resistant |
| Temperature Coefficient: | ±20ppm/°C |
| Operating Temperature: | -55°C ~ 350°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.110" Dia x 0.312" L (2.79mm x 7.92mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors
The WW12FT11R8 series is an through-hole, axial-leaded, general-purpose resistor with a wide range of values as low as 0Ω up to 1KΩ. This type of resistor is a cost-effective solution for many applications which require a simple passive resistor component. It is ideal for use in consumer and industrial electronics like amplifiers, radio frequency amplifiers, electronic timers, measuring instruments, communication equipment, LED lighting systems, and security systems.
The WW12FT11R8 series of through-hole resistors is a popular choice in the electronics industry due to its low cost and simple construction. The main material used in its construction is metal oxide, which is available in several different shapes and pre-formed diameters. Theresistive material is usually coated with a thin film of conductive material, such as tin, to provide the desired resistance and power handling characteristics. The conductor is then wrapped with a layer of insulating material such as PTFE or polyester. The leads are made of nickel-plated or gold-plated copper wire, and the end caps are typically made from a resin or epoxy.
The WW12FT11R8 is designed for use in a variety of applications, including analog circuits and signal conditioning systems. It is well suited for these applications because it can be configured with a resistance value that is adjusted to match a specific application. This adjustment can be done using a variety of methods, such as soldering, welding, or using a potentiometer to change the value of the resistance. The resistor is also suitable for use in digital circuits as it can provide an effective way to limit the current within a circuit so that it is not overloaded.
The resistance of the WW12FT11R8 can be further adjusted by tapping a small resistor connected in parallel with the main resistor to increase or decrease its resistance value. This allows for further customization of the type of resistor used in an application. This type of resistor is commonly used in audio circuits and other applications which require accurate resistive values. It is also widely used in voltage divider circuits to create an adjustable voltage reference.
The WW12FT11R8 series of through-hole resistors can be purchased in several different pre-formed sizes and shapes to fit most standard applications. It can also be used in unique high temperature applications thanks to its ability to withstand extreme temperatures. The resistance of the resistors can be further adjusted by using a soft-start resistor if necessary. This can be done by adding an additional resistor in series with the main resistor to reduce the effective resistance. This is particularly useful in applications where a large voltage change can cause potentially damaging current flow.
Overall, the WW12FT11R8 series of through-hole resistors is a simple and cost-effective solution for a wide variety of applications. Its simple construction makes it easy to assemble, and its pre-formed sizes and shapes make it suitable for a variety of different applications. The resistance value can be quickly and accurately adjusted, making it a great choice for applications which require precise resistor values. Its ability to withstand extreme temperatures also makes it an ideal choice for high temperature applications.
The WW12FT11R8 series is an through-hole, axial-leaded, general-purpose resistor with a wide range of values as low as 0Ω up to 1KΩ. This type of resistor is a cost-effective solution for many applications which require a simple passive resistor component. It is ideal for use in consumer and industrial electronics like amplifiers, radio frequency amplifiers, electronic timers, measuring instruments, communication equipment, LED lighting systems, and security systems.
The WW12FT11R8 series of through-hole resistors is a popular choice in the electronics industry due to its low cost and simple construction. The main material used in its construction is metal oxide, which is available in several different shapes and pre-formed diameters. Theresistive material is usually coated with a thin film of conductive material, such as tin, to provide the desired resistance and power handling characteristics. The conductor is then wrapped with a layer of insulating material such as PTFE or polyester. The leads are made of nickel-plated or gold-plated copper wire, and the end caps are typically made from a resin or epoxy.
The WW12FT11R8 is designed for use in a variety of applications, including analog circuits and signal conditioning systems. It is well suited for these applications because it can be configured with a resistance value that is adjusted to match a specific application. This adjustment can be done using a variety of methods, such as soldering, welding, or using a potentiometer to change the value of the resistance. The resistor is also suitable for use in digital circuits as it can provide an effective way to limit the current within a circuit so that it is not overloaded.
The resistance of the WW12FT11R8 can be further adjusted by tapping a small resistor connected in parallel with the main resistor to increase or decrease its resistance value. This allows for further customization of the type of resistor used in an application. This type of resistor is commonly used in audio circuits and other applications which require accurate resistive values. It is also widely used in voltage divider circuits to create an adjustable voltage reference.
The WW12FT11R8 series of through-hole resistors can be purchased in several different pre-formed sizes and shapes to fit most standard applications. It can also be used in unique high temperature applications thanks to its ability to withstand extreme temperatures. The resistance of the resistors can be further adjusted by using a soft-start resistor if necessary. This can be done by adding an additional resistor in series with the main resistor to reduce the effective resistance. This is particularly useful in applications where a large voltage change can cause potentially damaging current flow.
Overall, the WW12FT11R8 series of through-hole resistors is a simple and cost-effective solution for a wide variety of applications. Its simple construction makes it easy to assemble, and its pre-formed sizes and shapes make it suitable for a variety of different applications. The resistance value can be quickly and accurately adjusted, making it a great choice for applications which require precise resistor values. Its ability to withstand extreme temperatures also makes it an ideal choice for high temperature applications.
The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "WW12" Included word is 40
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| WW12JT5R10 | Stackpole El... | 0.13 $ | 1000 | RES 5.1 OHM 0.4W 5% AXIAL... |
| WW12FT1R78 | Stackpole El... | 0.15 $ | 1000 | RES 1.78 OHM 0.4W 1% AXIA... |
| WW12FB32R4 | Stackpole El... | 0.15 $ | 1000 | RES 32.4 OHM 0.4W 1% AXIA... |
| WW12FT2R80 | Stackpole El... | 0.15 $ | 1000 | RES 2.8 OHM 0.4W 1% AXIAL... |
| WW12FT5R76 | Stackpole El... | 0.15 $ | 1000 | RES 5.76 OHM 0.4W 1% AXIA... |
| WW12FT1R58 | Stackpole El... | 0.15 $ | 1000 | RES 1.58 OHM 0.4W 1% AXIA... |
| WW12FT287R | Stackpole El... | 0.15 $ | 1000 | RES 287 OHM 0.4W 1% AXIAL... |
| WW12FT6R19 | Stackpole El... | 0.15 $ | 1000 | RES 6.19 OHM 0.4W 1% AXIA... |
| WW12FT88R7 | Stackpole El... | 0.15 $ | 1000 | RES 88.7 OHM 0.4W 1% AXIA... |
| WW12FT1R27 | Stackpole El... | 0.15 $ | 1000 | RES 1.27 OHM 0.4W 1% AXIA... |
| WW12FT4R12 | Stackpole El... | 0.15 $ | 1000 | RES 4.12 OHM 0.4W 1% AXIA... |
| WW12FT4R42 | Stackpole El... | 0.15 $ | 1000 | RES 4.42 OHM 0.4W 1% AXIA... |
| WW12FT562R | Stackpole El... | 0.15 $ | 1000 | RES 562 OHM 0.4W 1% AXIAL... |
| WW12FT1K62 | Stackpole El... | 0.16 $ | 1000 | RES 1.62K OHM 0.4W 1% AXI... |
| WW12FB24R3 | Stackpole El... | 0.15 $ | 1000 | RES 24.3 OHM 0.4W 1% AXIA... |
| WW12FT715R | Stackpole El... | 0.15 $ | 1000 | RES 715 OHM 0.4W 1% AXIAL... |
| WW12FT280R | Stackpole El... | 0.15 $ | 1000 | RES 280 OHM 0.4W 1% AXIAL... |
| WW12FT8R87 | Stackpole El... | 0.15 $ | 1000 | RES 8.87 OHM 0.4W 1% AXIA... |
| WW12FT84R5 | Stackpole El... | 0.15 $ | 1000 | RES 84.5 OHM 0.4W 1% AXIA... |
| WW12FB11R8 | Stackpole El... | 0.15 $ | 1000 | RES 11.8 OHM 0.4W 1% AXIA... |
| WW12FT124R | Stackpole El... | 0.15 $ | 1000 | RES 124 OHM 0.4W 1% AXIAL... |
| WW12FT5R49 | Stackpole El... | 0.15 $ | 1000 | RES 5.49 OHM 0.4W 1% AXIA... |
| WW12JTR270 | Stackpole El... | 0.16 $ | 1000 | RES 0.27 OHM 0.4W 5% AXIA... |
| WW12JTR510 | Stackpole El... | 0.16 $ | 1000 | RES 0.51 OHM 0.4W 5% AXIA... |
| WW12FT21R0 | Stackpole El... | 0.15 $ | 1000 | RES 21 OHM 0.4W 1% AXIAL2... |
| WW12FT267R | Stackpole El... | 0.15 $ | 1000 | RES 267 OHM 0.4W 1% AXIAL... |
| WW12JT12R0 | Stackpole El... | 0.13 $ | 1000 | RES 12 OHM 0.4W 5% AXIAL1... |
| WW12JT33R0 | Stackpole El... | 0.13 $ | 1000 | RES 33 OHM 0.4W 5% AXIAL3... |
| WW12FT10R5 | Stackpole El... | 0.15 $ | 1000 | RES 10.5 OHM 0.4W 1% AXIA... |
| WW12FT4R75 | Stackpole El... | 0.15 $ | 1000 | RES 4.75 OHM 0.4W 1% AXIA... |
| WW12FT1K33 | Stackpole El... | 0.16 $ | 1000 | RES 1.33K OHM 0.4W 1% AXI... |
| WW12JT20R0 | Stackpole El... | 0.13 $ | 1000 | RES 20 OHM 0.4W 5% AXIAL2... |
| WW12FT348R | Stackpole El... | 0.15 $ | 1000 | RES 348 OHM 0.4W 1% AXIAL... |
| WW12FT60R4 | Stackpole El... | 0.15 $ | 1000 | RES 60.4 OHM 0.4W 1% AXIA... |
| WW12FT73R2 | Stackpole El... | 0.15 $ | 1000 | RES 73.2 OHM 0.4W 1% AXIA... |
| WW12JTR820 | Stackpole El... | 0.16 $ | 1000 | RES 0.82 OHM 0.4W 5% AXIA... |
| WW12FT1K02 | Stackpole El... | 0.16 $ | 1000 | RES 1.02K OHM 0.4W 1% AXI... |
| WW12FT57R6 | Stackpole El... | 0.15 $ | 1000 | RES 57.6 OHM 0.4W 1% AXIA... |
| WW12FT1R18 | Stackpole El... | 0.15 $ | 1000 | RES 1.18 OHM 0.4W 1% AXIA... |
| WW12FT7R87 | Stackpole El... | 0.15 $ | 1000 | RES 7.87 OHM 0.4W 1% AXIA... |
Latest Products
SQM700JB-68K
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
SQM700JB-1R3
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RNC60J24R9FSB14
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RWR89S2R80DRS70
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RNC60J7503FSB14
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RWR81S3400FSB12
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...