WW12JT7R50

Series:	WW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	7.5 Ohms
Tolerance:	±5%
Power (Watts):	0.4W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.110" Dia x 0.312" L (2.79mm x 7.92mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole ResistorsThe WW12JT7R50 is a through hole resistor. It is a two-terminal device that can be used to reduce the flow of electric current to a desired level. Typically, they are used to limit the power load and provide protection, stable performance and electrical isolation.In order to understand the practical application and working principles of the WW12JT7R50, it is useful to understand how resistors work. A resistor is a passive component which has the ability to convert electrical energy into heat energy for the purpose of resistance. The resistor works by allowing a specific amount of electrical current to flow through it. This electrical current is measured in Amperes (amps) and is sent to a specific point determined by the resistance value of the resistor. The resistance value of the resistor determines how much current will pass through it and this resistance value is referred to as its ohmic value. The WW12JT7R50 is a through hole resistor. It consists of a ceramic housing with two holes drilled on it, into which two metallic contacts with a specific resistance value are inserted. This creates an artificial resistive element that is connected in series with the current circuit. It is useful in situations where the resistive value of the load needs to be adjusted from time to time. The advantage of using such devices is that they allow flexibility in the selection of the resistive value.The WW12JT7R50 offers a wide range of resistive options that can be selected depending on the application. The most common values for the WW12JT7R50 are 0.2, 0.5, 1, 2, 3, 4, 5, 10, 15, 20, 25, 30, 40 and 50 ohms. Depending on the application, it is possible to choose a combination of these values to create a particular resistive load.The working principle of the WW12JT7R50 is based on the theory that the addition of the resistive value of the device to the circuit affects the output voltage of the circuit. The output voltage of the circuit with a WW12JT7R50 will be lower than that without any resistive element. This is because the voltage is dissipated across the resistive element of the device, thus lowering the output voltage.The WW12JT7R50 is widely used in a variety of applications. It is used in power supplies, audio amplifiers and other electronic circuits. The resistive value of the device can be adjusted and fine tuned to provide the desired output voltage. It is also used in current limiters, impedance matching circuits as well as in protection circuits.To conclude, the WW12JT7R50 is a through hole resistor which is used in a variety of applications. It is a two-terminal device that can be used to reduce the current flow in a circuit. Its resistive value can be adjusted and fine tuned to provide the desired output voltage. Furthermore, it is used in various current limiters, impedance matching circuits as well as protection circuits. It offers a wide range of resistive options and is an essential component in many electronic devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description