X00602MN5BA4 Discrete Semiconductor Products

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Voltage - Off State:	600V
Voltage - Gate Trigger (Vgt) (Max):	800mV
Current - Gate Trigger (Igt) (Max):	200µA
Voltage - On State (Vtm) (Max):	1.35V
Current - On State (It (AV)) (Max):	500mA
Current - On State (It (RMS)) (Max):	800mA
Current - Hold (Ih) (Max):	5mA
Current - Off State (Max):	1µA
Current - Non Rep. Surge 50, 60Hz (Itsm):	9A, 10A
SCR Type:	Sensitive Gate
Operating Temperature:	-40°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	TO-261-4, TO-261AA
Supplier Device Package:	SOT-223
Base Part Number:	X006

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are solid state switches that have been around since the early 1950s. They are used in high-power applications, such as power supplies, motor drives, and power rail switching. Thyristors are controlled switches, meaning that they can be triggered on and off by a signal or power supply. As thyristors are essentially two-terminal switching devices, the situation arises of a contact being closed when current starts to flow through them. This means that in certain applications, a single thyristor can be used instead of separate switches. The X00602MN5BA4 thyristor is a four-terminal device, which is a type of thyristor that offers more control over the current flow when compared to conventional two-terminal thyristors. This type of thyristor can be used for a variety of applications where precise timing of power transfer is important, such as motor control, lighting control, and switching large loads of power. The X00602MN5BA4 consists of a P-channel and N-channel thyristor side-mounted to the same semiconductor substrate, along with two external gate terminals used to switch the thyristor on and off. The gate terminals can be connected to either a voltage or current source, depending on the type of application. When a voltage or current is applied to the gate terminals, it causes the P-channel layer to begin conducting current, which switches the thyristor on. The X00602MN5BA4 also has two main operating modes: the blocking mode, and the forward conduction mode. In blocking mode, the thyristor remains non-conductive. When a voltage or current is applied to the gate terminals, the thyristor switches to forward conduction mode, allowing current to flow from anode to cathode. When the gate signal is removed, the thyristor reverts to blocking mode.The X00602MN5BA4 thyristor, due to its four-terminal design, is able to offer superior control over the on-off switching of the thyristor. This makes it highly suitable for applications that require precise timing of power transfer, such as motor control, lighting control, and switching large loads of power. As such, the X00602MN5BA4 is suitable for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description