X28HC64P-12

X28HC64P-12 is a product in the memory field. It is an 8-pin EEPROM device with 8K bytes of electrically erasable programmable read-only memory (EEPROM) organized as 1024 blocks of 8 bytes each. The device offers advanced low-power CMOS technology, high-speed operation, and a high-reliability (500K cycle) EEPROM write cycle.

X28HC64P-12 is a suitable choice for applications requiring secure storing of parameters, settings, and other data that require frequent or occasional updates. X28HC64P-12 can be used in automotive systems, consumer electronics, office automation systems, industrial control, medical equipment, and other applications.

X28HC64P-12 comes with a wide range of features and benefits, including an enhanced write algorithm for improved data reliability and increased write speed, improved reliability for lower power consumption, high endurance and data retention, and an improved system design for higher performance with lower cost.

X28HC64P-12 features an internal erase and write logic to ensure that data is securely erased and written with the highest level of accuracy. The X28HC64P-12 also features an enhanced program/erase time setting, which helps to optimize power consumption while maximally preserving data integrity. X28HC64P-12 also offers a low-voltage program/erase (LVPE) mode, which allows a maximum write/erase voltage of 3.5V.

X28HC64P-12 includes an integrated I2C serial EEPROM interface that offers simple and flexible communication between the device and a host controller. It can be accessed via a standard I2C interface, with data rates up to 100 kHz. The device also includes an integrated memory protection mechanism to protect data against inadvertent corrupted bits.

The working principle of the X28HC64P-12 is as follows: when the X28HC64P-12 is powered on, the write enable (WE) command is sent to the device from the host device. Upon reception of the WE command, the X28HC64P-12 will enable the write operation and allow data to be written to the memory. After the data is successfully written, the X28HC64P-12 will reset the write enable line, thus disabling the write operation.

To erase data from the X28HC64P-12, the erase enable (EE) command is sent to the device from the host device. Upon reception of the EE command, the X28HC64P-12 will enable the erase operation and allow the data stored in the memory to be erased. After the data is successfully erased, the X28HC64P12 will reset the erase enable line, thus disabling the erase operation.

X28HC64P-12 provides a secure, dependable, and cost-effective approach to storing data, settings, and parameters. It is the perfect choice for applications where data integrity, low power consumption, and high performance come together.