X40010S8I-CT1

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Type:	Multi-Voltage Supervisor
Number of Voltages Monitored:	2
Output:	Push-Pull, Totem Pole
Reset:	Active High
Reset Timeout:	Adjustable/Selectable
Voltage - Threshold:	1.7V, 2.9V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOIC
Base Part Number:	X40010

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The X40010S8I-CT1 is a Power Management Integrated Circuit (PMIC) specifically designed to provide a supervisor core for general purpose Power Management applications. It offers a wide range of features such as low quiescent current, high accuracy voltage monitoring, reset signal and flow control, as well as power sequencing and control.

Application Fields of X40010S8I-CT1

X40010S8I-CT1 is suited for a wide range of power management applications, mainly for protecting and controlling power systems in consumer and industrial applications. In consumer applications, it is often used for battery-backed applications, where its RESET and flow control capabilities can be used to preserve the system’s state in the event of a power failure. Similarly, its reset and power sequencing capabilities are also useful for protecting switching power supplies and other sensitive systems from damage in the event of external failures and faults. In industrial applications, the X40010S8I-CT1 is used for a variety of purposes, depending on the application. It can be used as a power supervisor, monitoring system voltages and providing reset in the event of a fault. Additionally, it can be used as a power train controller, providing PWM shutdown, which can be used to protect motors and other hardware from damage in the event of an overload. Finally, it can also be used to control and monitor the power sequences and voltages in order to improve overall system efficiency.

Working Principle of X40010S8I-CT1

The X40010S8I-CT1 is a complex integrated circuit, and its working principle is largely determined by the underlying circuitry. Simply put, the X40010S8I-CT1 provides a supervisor core for general purpose power management applications through the monitoring of system voltages and the provision of reset signals, flow control, and power sequencing and control. In order to operate, the X40010S8I-CT1 requires an external voltage source, which is used as a reference voltage to accurately monitor system voltage. It then uses a series of comparators to compare the system voltage to the reference voltage, and determine if the voltage is within a certain range. Depending on the range, the X40010S8I-CT1 will then output either a reset or a flow control signal. The X40010S8I-CT1 also incorporates a power sequencing and control system, which is used to sequence individual components of the power system in order to optimize system performance. This sequencing system monitors the voltages of each component in the system, and then engages the proper one based on the voltage level. In addition to providing power sequencing, the X40010S8I-CT1 can also monitor the voltages of individual components, and then send out flow control or reset signals if certain conditions are met, such as an overload condition. Finally, the X40010S8I-CT1 also provides low quiescent current, which is an important factor when it comes to power management. Low quiescent current is a requirement for many power management applications, as it helps to conserve energy and ensure power supplies are used efficiently. The X40010S8I-CT1 is designed to provide high accuracy voltage monitoring while operating at low quiescent current, making it a great choice for power management applications.

Conclusion

The X40010S8I-CT1 is a specialized PMIC specifically designed to provide a supervisor core for general purpose power management applications. It offers a wide range of features such as low quiescent current, high accuracy voltage monitoring, reset signal and flow control, as well as power sequencing and control. It is suited for a wide range of power management applications, particularly for protecting and controlling power systems in consumer and industrial applications. Finally, its working principle is largely determined by the underlying circuitry, and it utilizes a series of comparators to compare system voltages to reference voltages, and determine the necessary action to take when certain conditions are met.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description