X40011V8-C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The X40011V8-C is a high-tech device which belongs to PMIC - Supervisors. It is primarily used for supervising nearly any electronic circuit and monitoring system power-on. This supervisor can assist in managing voltage sequencing, undervoltage lockout and power-on reset circuitry. X40011V8-C can fit nearly any kind of application with its wide pulse adjustment range and its unique of 1.8V to 5.5V voltages range. This miniature device can serve several different applications from notebook computers to embedded systems.

The X40011V8-C is a complete dual-phase voltage supervisor designed to control multiple power rails during system power-on. It has built-in voltage monitoring and reset generation circuits which allow it to reset the system during a brownout or power failure. The reset generation circuits also monitor input power, and can detect changes in the input power by sensing the rising or falling edges of the voltage. The reset behavior of the X40011V8-C can be programmed by connecting the two programmable hold and the two programmable reset pins to ground. This supervisor also features two power-down reset outputs which can be used to reset the other ICs in the system when the input power is below the power-down threshold.

The X40011V8-C device includes an internal voltage monitor that can detect an undervoltage condition on the main supply (Vcc). The V monitor also counts time and evaluate the time delay before powering-on the supervisor. The X40011V8-C can be configured to provide either a power-on reset (POR) or an undervoltage reset (UVR). When used in POR mode, the X40011V8-C device triggers a reset whenever the voltage falls below its active threshold. In UVR mode, the device will not trigger a reset until the voltage falls below its active threshold for a predetermined time period. The X40011V8-C can be programmed to generate a reset or an active low or an active high signal to the system.

The X40011V8-C is designed with features such as a built-in watchdog timer, power-down management circuitry and an adjustable reset timer to create an efficient system latch up management. When used in combination with its power-down management circuit, the X40011V8-C will issue a reset if the main supply voltage fall below the power-down threshold. Its adjustable reset timer can be used to program the system to be reset after a certain number of cycles, thus ensuring that the system is always operating within its safe range. The watchdog timer can be used to periodically reset the system if its operation fails.

The X40011V8-C also features an adjustable voltage monitor which can monitor any voltage within its range. This feature can be used to monitor the voltage of any IC in the system, ensuring that the ICs are functioning properly. In addition, the X40011V8-C can be used to protect the system from overvoltage and surge conditions by setting the overvoltage threshold. The device will trigger a reset in the event of an overvoltage condition, preventing device damage from occurring.

The X40011V8-C is also suitable for use in any digital system that requires voltage supervision, as well as noise and surge protection. By combining both power-down management and overvoltage protection, the X40011V8-C can be used to create an efficient power-on reset system for any application. With its wide range of features and its flexibility, the X40011V8-C can provide an effective solution for any supervisor requirement.

The specific data is subject to PDF, and the above content is for reference