X40014S8I-C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Management Integrated Circuit (PMIC) has been an integral part of electronic engineering. It is a semiconductor device that is used to regulate the flow of electricity in an electrical system. PMICs are used to provide power to components of electronics, enabling them to function. PMICs are also used to monitor and control the power usage of electronic devices. Among the various types of PMICs, Supervisors are some of the most important. Supervisors are usually integrated into specialized PMIC devices that have dedicated functions, such as monitoring power usage, detecting over-voltage, and applying over-current protection. X40014S8I-C is a Type 2 PMIC Supervisors that offer reliable detection and protection of over-voltage or over-current conditions. The key features of X40014S8I-C include an active low RESET output, voltage supervisor threshold, and regulation voltage range from 2.25V to 5.5V. The built-in watchdog timer can be used to time-out faults, or be used as a system reset. The X40014S8I-C has a low quiescent current (IQ) which consumes very little power when in inactive state. X40014S8I-C is a CMOS type supervisor IC which is suited for microcontroller-based and other regulated electronics systems. It can be used for supplying power for MCU-based microcontrollers, LCD and other registers. The X40014S8I-C is well suited for a variety of applications and it is reliable, cost-effective and highly efficient supervisor IC. It can also be used to monitor and protect the power systems, such as laptop batteries, solar panel charging circuits, and other power management applications.The working principle of X40014S8I-C involves monitoring the voltage of the external power source, and actively detects the over-voltage or over-current condition. If the voltage of the external power source exceeds the pre-set threshold, the supervisor will detect the over-voltage or over-current condition, and then immediately activate the active low RESET output, which is then propagated to the microcontroller to reset the system. The X40014S8I-C also features the built-in watchdog timer, which can be used in conjunction with the RESET output. If a time-out fault occurs, the watchdog timer will time-out the fault and reset the system. This makes it ideal for fault-tolerant designs, as the system can be reset if any faults are detected.In addition, the X40014S8I-C provides a reset pin which can be used to manually reset the IC. The reset pin is active low, so if the voltage of the pin is below the threshold voltage, it will cause the output to be reset and the IC will go into inactive state. Overall, X40014S8I-C is a high performance, low power consumption PMIC supervisor IC which is ideal for detecting and protecting applications such as microcontrollers, LCD and other registers. It\'s features such as voltage supervision, watchdog timer and reset pin make it well suited for a variety of applications.

The specific data is subject to PDF, and the above content is for reference