X9015UM8IT1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital Potentiometers allow for adjustable resistance for the purpose of calibrating or testing circuits, or managing power consumption. The X9015UM8IT1 is a programmable digital potentiometer for single supply analog and digital applications. It renders the range of potentiometer settings and adjusts the analog signals.

Analog devices such as X9015UM8IT1, which are also known as R-2Rs, store the equivalent of an analog voltage in the form of an 8-bit binary code. Instead of a spiral slider contact, 8 bits of digital information can represent 256 possible resistance settings. The resolution of the potentiometer is defined by the number of bits in an R-2R ladder.

Since the X9015UM8IT1 contains an on-chip voltage reference, a simple linear voltage-to-resistance conversion without the need for any external components results in technical accuracy and precision. The potentiometer has many uses, including volume and balance control, power-supply control and dynamic voltage scaling, etc. Some of these applications use X9015UM8IT1 to adjust the resistance for calibration or testing or dynamic current- or voltage-source applications.

The X9015UM8IT1 uses the classic application of digital potentiometers, setting the resistance between two points in a circuit. It manufactures such a device is an economical choice, since no additional components are required, and there will not be any other circuitry.

The X9015UM8IT1\'s output voltage is proportional to the binary code that it is programmed with; the least significant bit (LSB) is the basic increment addressed. This makes it easy to precisely adjust the parameters of a circuit. The 8-bit potentiometer provides 256 distinct wiper steps.

Independent of the control signal, a single 2-wire compatible interface can use either a simple address-data bus or a single-wire bidirectional data stream interface. The potentiometer settings can be changed by writing a new voltage value to the EEPROM. The X9015UM8IT1 requires only a single power source of up to 5.5 volts, and its current draw is very low.

The X9015UM8IT1 is widely used as a programmable resistance element in digital systems as a variety of applications. It is used as a digital-to-analog convertor in DAC applications. It is also used to control the gain of an AC signal, which can be used to accurately adjust the power level of a signal. It is also used in LCD panel backlight brightness to provide a wide range of brightness settings. It can be used to adjust the tone level of an audio signal by providing a continuously adjustable resistance.

In addition, X9015UM8IT1 finds use in digitally-tuned analog radio systems, in order to adjust the sensitivity and tuning of the receiver. It is also used for implementing analog automatic gain control in narrow-band systems.

To sum up, the X9015UM8IT1 is a versatile, low-cost digital potentiometer. It requires no additional components, has low power consumption, low noise and 255 distinct resistive steps which offer excellent linearity, making it suitable for a broad range of applications. It is ideal for applications such as volume and balance control, power supply control, dynamic voltage scaling, LCD panel backlight brightness, and digitally-tuned analog radio systems.

The specific data is subject to PDF, and the above content is for reference