X9110TV14ZT1

Memory Type:	Non-Volatile
Base Part Number:	X9110
Supplier Device Package:	14-TSSOP
Package / Case:	14-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	0°C ~ 70°C
Resistance - Wiper (Ohms) (Typ):	150
Temperature Coefficient (Typ):	±300 ppm/°C
Tolerance:	±20%
Features:	Selectable Address
Voltage - Supply:	5V
Series:	XDCP™
Interface:	SPI
Resistance (Ohms):	100k
Number of Taps:	1024
Number of Circuits:	1
Configuration:	Potentiometer
Taper:	Linear
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital Potentiometers

Digital Potentiometers, also known as DigiPots or digital potentiometers, are types of resistors that are used to adjust the analog output of an electronic device. A digital potentiometer is a two-terminal device that typically has two or more terminals that can be adjusted in order to produce a desired voltage or resistance. They are usually integrated circuits (ICs) that are designed to provide a precise and adjustable resistance for analog signals. The X9110TV14ZT1 digital potentiometer is an integrated circuit (IC) designed for use in many data acquisition (DAQ) and signal conditioning applications. It is a 10kOhm digital potentiometer with a one-wire Serial Peripheral Interface (SPI). The SPI interface allows the X9110TV14ZT1 to be controlled and monitored via a low-power, single-wire serial bus. The X9110TV14ZT1 also contains a non-volatile memory, which allows the previously saved setting to quickly be recalled if power is removed. The X9110TV14ZT1 is a programmable digital potentiometer that has three separate terminals. The first two are typically connected to either end of the resistance range and serve as the adjustable taps. The third terminal is connected to a single-wire serial port that is used to control the resistance. The single-wire serial port serves as a low-power, single-wire data interface to control the Pot. The X9110TV14ZT1 can be configued for either potentiometer or R/C network mode, which allows for a higher resistance resolution. The X9110TV14ZT1 is typically used in many applications such as, audio equipment, motor control, cooling fans, power supplies and system-level security as well as many other data acquisition systems. The X9110TV14ZT1 has a wide range of features, including an adjustable R/C network mode, a non-volatile memory, and a programmable data parking and locking feature. Additionally, it has power down and polarity reverse capabilities, which allow the device to be reset, if necessary, without re-programming. The X9110TV14ZT1 works by using a single wire serial port to control the resistance of the two adjustable taps. When the device is first started, it begins in its initial state, where both terminals are connected to the same voltage. This voltage determines the starting resistance value. The user then sends commands via the serial port to either increase or decrease the voltage of one of the taps, in order to change the resistance. The X9110TV14ZT1 also allows for different operating modes, such as, an R/C network mode, which allows for a much higher resistance resolution. In conclusion, the X9110TV14ZT1 digital potentiometer is a versatile and reliable device that can be used for a wide variety of applications. Its programmable features allow for precise control over the resistance level, making it especially useful for data acquisition and signal conditioning applications. Its non-volatile memory allows it to quickly recall the previously-saved settings if power is removed. The X9110TV14ZT1 is sure to become a valuable addition to any data acquisition and signal conditioning system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description