Allicdata Part #: | X9C503SZ-ND |
Manufacturer Part#: |
X9C503SZ |
Price: | $ 4.04 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Intersil |
Short Description: | IC XDCP 100-TAP 50K EE 8-SOIC |
More Detail: | Digital Potentiometer 50k Ohm 1 Circuit 100 Taps U... |
DataSheet: | X9C503SZ Datasheet/PDF |
Quantity: | 817 |
1 +: | $ 3.67290 |
10 +: | $ 3.29868 |
100 +: | $ 2.70270 |
500 +: | $ 2.30076 |
1000 +: | $ 1.94040 |
Memory Type: | Non-Volatile |
Base Part Number: | X9C503 |
Supplier Device Package: | 8-SOIC |
Package / Case: | 8-SOIC (0.154", 3.90mm Width) |
Operating Temperature: | 0°C ~ 70°C |
Resistance - Wiper (Ohms) (Typ): | 40 |
Temperature Coefficient (Typ): | ±300 ppm/°C |
Tolerance: | ±20% |
Features: | -- |
Voltage - Supply: | 5V |
Series: | XDCP™ |
Interface: | Up/Down (U/D, INC, CS) |
Resistance (Ohms): | 50k |
Number of Taps: | 100 |
Number of Circuits: | 1 |
Configuration: | Potentiometer |
Taper: | Linear |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The X9C503SZ digital potentiometer is a powerful device that is typically used in data acquisition (DAQ) and control applications. This device offers the ability to set gain and offset values with the digital control. It also provides a means to programmatically change those values for DAQ and control purposes.
This type of potentiometer works on an analog basis. Essentially, it is composed of two resistors connected in series, with a wiper in between that acts as a third resistor. The wiper is adjusted depending on the input voltage, so that a certain proportion of the total voltage is available at the wiper point. Depending on the type of potentiometer, these resistors may be either linear or logarithmic in their resistance values. Potentiometers like the X9C503SZ often have provision for three ground connections, one for the low side, one for the high side, and one for the wiper.
The X9C503SZ is often used for digital control purposes as its flexibility allows it to be easily scaled and adjusted using a digital interface. This feature is especially useful in applications such as motor control or robotics. In these cases, the X9C503SZ can be used to precisely control the speed, torque, and/or direction of a motor. It can also be used to set the voltage of a set of LEDs. The digital control inputs allow the user to adjust the gain and offset settings associated with the potentiometer, as well as set the starting voltage of the wiper.
In addition to usings its digital control capabilities, the X9C503SZ is also commonly used for signal conditioning purposes. Its resistors can be used to buffer incoming signals and attenuate them, so that the signal reaching the DAQ device has been appropriately conditioned for recording and analysis. This signal conditioning can be further adjusted using the digital control input pins to set gain and offset values as needed.
The X9C503SZ is also often used in calibration applications due to its ability to scale its resistance values. By changing the digital control inputs, the resistance values are adjusted relative to the full scale range of the potentiometer. This relative resistance range can then be used to calibrate voltage levels and other similar values. This type of calibration process can be iteratively refined, so that a the most accurate calibration is achieved.
Overall, the X9C503SZ is an incredibly versatile and powerful component that finds use in many DAQ and control applications. By harnessing the potentials of its analog and digital components, budding engineers and seasoned technologists alike can use this component to accurately and precisely control the gain, offset, and starting voltage of their projects, as well as condition their DAQ signals for optimal accuracy. With the versatile X9C503SZ, any project requiring precise control or signal conditioning is within reach.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
X9C503SZT1 | Intersil | 2.03 $ | 1000 | IC XDCP 100-TAP 50K EE 8-... |
X9C503PIZ | Intersil | 2.75 $ | 1000 | IC XDCP 100-TAP 50K EE 8-... |
X9C503P | Intersil | 0.0 $ | 1000 | IC DIGITAL POT 50K 100TP ... |
X9C503PI | Intersil | -- | 1000 | IC DIGITAL POT 50K 100TP ... |
X9C503S | Intersil | -- | 1000 | IC DIGITAL POT 50K 100TP ... |
X9C503SI | Intersil | -- | 1000 | IC DIGITAL POT 50K 100TP ... |
X9C503SZ | Intersil | 4.04 $ | 817 | IC XDCP 100-TAP 50K EE 8-... |
X9C503SIZT1 | Intersil | -- | 2500 | IC POT DGTL CTRL 50K OHM ... |
X9C503PZ | Intersil | 3.23 $ | 1376 | IC XDCP 100-TAP 50K EE 8-... |
X9C503SIZ | Intersil | -- | 547 | IC XDCP 100-TAP 50K EE 8-... |
X9C503SIT1 | Intersil | -- | 1000 | IC XDCP 100-TAP 50K EE 8-... |
X9C503SIT2 | Intersil | 0.0 $ | 1000 | IC XDCP 100-TAP 50K EE 8-... |
X9C503ST1 | Intersil | -- | 1000 | IC XDCP 100-TAP 50K EE 8-... |
X9C503ST2 | Intersil | 0.0 $ | 1000 | IC XDCP 100-TAP 50K EE 8-... |
IC DGTL POT INTERFACE 24TSSOPDigital Pot...
IC DGTL POT 4CH 50K 20QFNDigital Potenti...
IC DGTL POT 256POS 10K 20TSSOPDigital Po...
IC POT DPP 32TAP U/D SOT23-8Digital Pote...
IC POT DPP NV 32TAP U/D 8MSOPDigital Pot...
IC POT 256TAPS 5BYTES 8-MSOPDigital Pote...