XC6119C22ANR-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The XC6119C22ANR-G is a supervisor series PMIC (Power Management Integrated Circuit) by ON Semiconductor, a globally recognized semiconductor manufacturing company. This device is used to monitor the level of a power supply voltage and activate a reset output when it deviates from the designated level. Additionally, the XC6119C22ANR-G provides a wide range of features, such as voltage supervisor, reset monitor, programmable detection levels, power-on reset (POR), and manual reset (MR).

The XC6119C22ANR-G is most commonly used in power supply voltage and reset monitoring system applications. These applications require a reliable monitoring device that will detect any desired voltage and reset as needed. Additionally, this device can be used in a wide range of applications that require monitoring and reset such as LP (Low Power) systems, medical, automotive, and consumer electronics.

The XC6119C22ANR-G is designed with a working principle consisting of three main components; the monitoring circuit, the output mode selection circuit, and the manual reset input circuit.

The monitoring circuit consists of two main parts, the voltage supervisor and the reset monitor. The voltage supervisor has two thresholds; the upper trip point (Ttrip) and the lower trip point (Ttrip l). The upper trip point (Ttrip) is set to a voltage that is higher than the actual power supply voltage. When the power supply voltage reaches this threshold, the reset output is activated. The lower trip point (Ttrip l) is set to a voltage that is lower than the actual power supply voltage. When the power supply voltage reaches this lower threshold, the reset output is activated again. The reset monitor is used to monitor the voltage of the reset output. If the reset output voltage begins to decline, it is detected as a reset event and the reset monitor will reset the XC6119C22ANR-G.

The output mode selection circuit is used to select the output mode of the XC6119C22ANR-G. This circuit consists of two options; the push-pull output and the open-drain output. When the appropriate signal is applied, the output mode is selected. For example, when signal A is applied, the output mode is the push-pull output and when signal B is applied, the output mode is selected as open-drain output.

The manual reset input circuit is used to manually reset the XC6119C22ANR-G. When a signal is applied to this circuit, the reset monitor is activated and the XC6119C22ANR-G is reset. The input signal to this circuit must be a continuously low signal, otherwise the reset will not be activated.

Overall, the XC6119C22ANR-G is a PMIC device that is used in a wide range of applications to both monitor the power supply voltage and reset the device when necessary. This series is a reliable and cost-effective solution for any application requiring monitoring of a power supply voltage and reset protection.

The specific data is subject to PDF, and the above content is for reference