XC6123F632MR-G

PMIC supervisors are critical components in the solution architecture of any digital system. The NXP Semiconductors XC6123F632MR-G is an example of such a critical part. This part offers a wide range of features such as reset by pulse width, reset signal output, automated power fail detection and notification, power-good output and voltage monitoring.

The XC6123F632MR-G can be used in a range of applications, including industrial, automotive and consumer systems. Its primary purpose is to detect abnormal system status and take appropriate action to protect the system. It can be used in system reset applications, power management applications and voltage monitoring applications.

The XC6123F632MR-G has two main components. The first is a controller, which is responsible for detecting abnormal system status and providing the appropriate control signal to the system. The second is a voltage monitor, which monitors the input voltage in order to determine if the system is entering a low-voltage or high-voltage condition.

The XC6123F632MR-G also provides an automated reset function. This is achieved by using two separate reset signals. The first is a Pulse Width Modulated (PWM) reset signal, which is used to generate a short reset pulse when the system enters an abnormal state. The second is a reset signal output, which is used to provide an indication of system status to external devices. The PWM reset signal can be triggered by any of the following sources: Power Fail, Low Voltage, Over Temperature, Brown-Out Detection, or an external source.

The XC6123F632MR-G also provides a power-good output. This output can be used to detect and indicate if the power supply voltage is within the allowed range. The Power Fail Detection and Notification feature of the XC6123F632MR-G can provide a warning or notification when the supply voltage falls below a certain threshold.

Finally, the XC6123F632MR-G also provides a Voltage Monitoring function. This function allows the XC6123F632MR-G to measure the input voltage level, compare it to the preset voltage limits, and take the appropriate action depending on the result. If the measured voltage is within the acceptable range, the XC6123F632MR-G will remain idle. If, however, the measured voltage exceeds the preset limit, the XC6123F632MR-G will initiate a system reset or power-fail event.

In summary, the XC6123F632MR-G is a powerful PMIC supervisor which can be used in a variety of applications. It offers a wide range of features such as reset by pulse width, reset signal output, automated power fail detection and notification, power-good output and voltage monitoring. The features and functions make the XC6123F632MR-G an ideal choice for system reset, power management and voltage monitoring applications.