XMC4104F64F128BAXQMA1

Introduction

XMC4104F64F128BAXQMA1 is an advanced 32-bit ARM® Cortex®-M4 based microcontroller belonging to the XMC4000 series by Infineon Technologies. It is especially designed for motor control applications, including industrial automation, home appliances, and lighting control, providing a broad range of peripherals and features.

Application Field

The XMC4104F64F128BAXQMA1 is designed to provide high-performance motor control solutions for industrial automation applications, such as Factory Automation, Robotics, HVAC and more. With a power consumption of up to 150 mW and a self- waking capability, the XMC4104F64F128BAXQMA1 can reduce power consumption while still offering high-performance motion control.

The XMC4104F64F128BAXQMA1 is equipped with a rich set of peripherals, including an advanced crossbar matrix, an SPI/MICROWIRE/CMOS interface, an intelligent analog front-end (AFE) system, and several digital signal processing (DSP) peripherals for advanced motor control applications. The powerful motor control capabilities include current sensing, field-oriented control, curent-mode control, rotor flux angle measurement, commutation timing and position control.

The XMC4104F64F128BAXQMA1 is also a great choice for applications involving digital power supplies, as it offers a power-saving mode designed to minimize power consumption. In addition, the microcontroller also provides a wide range of safety features, including an integrated safety monitor, error-correcting code memory protection, and integrated cyclic redundancy check (CRC), making it suitable for demanding industrial automation applications.

Working Principle

The XMC4104F64F128BAXQMA1 is based on Infineon’s XMC4000 architecture, which combines the ARM Cortex-M4 with a powerful set of peripherals. The Cortex-M4 is a 32-bit processor optimized for low power and high performance. It provides a rich set of instructions for fast program execution and low power consumption, making it ideal for embedded applications. It can run at clock speeds up to 120 MHz, allowing the XMC4104F64F128BAXQMA1 to perform complex motor control tasks quickly and accurately.

The XMC4104F64F128BAXQMA1 includes a 32-bit crossbar matrix, which provides advanced interconnectivity between the ARM Cortex-M4 core and the peripherals. The matrix also supports direct memory access (DMA) to reduce latency and power consumption. This advanced connectivity can be used to set up flexible communication between the ARM Cortex-M4 core and the external peripherals, allowing the microcontroller to quickly access data while consuming less power.

The XMC4104F64F128BAXQMA1 also features an integrated power-saving mode that can reduce power consumption to as low as 150mW. This mode is activated when the system enters a sleep state. The peripherals are then shut down to minimize power consumption while still maintaining the processor’s functionality. This power-saving mode can be programmed using the integrated clock and power-on controller (CPOC).

The XMC4104F64F128BAXQMA1 also includes several digital signal processing (DSP) peripherals, including an advanced analog front-end (AFE) system. This system is capable of accurately measuring motor current, as well as providing a variety of control algorithms for advanced motor control tasks. In addition, the motor control peripherals include field-oriented control (FOC), current-mode control (CMC), and rotor flux angle measurement.

The XMC4104F64F128BAXQMA1 is also equipped with a wide range of safety features, making it an ideal choice for industrial automation applications. These features include an integrated safety monitor, error-correcting code memory protection, and integrated cyclic redundancy check (CRC). All these features provide a secure platform for reliable and efficient operation.

Conclusion

The XMC4104F64F128BAXQMA1 is a powerful 32-bit ARM Cortex-M4-based microcontroller designed to provide high-performance and low-power solutions for industrial automation applications. Its advanced crossbar matrix, integrated analog front-end system, and rich set of motor-control peripherals make it an ideal choice for a variety of motor-control applications. In addition, its integrated safety features make it suitable for demanding industrial automation applications.