XR88C92IV-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Universal Asynchronous Receiver Transmitter is a type of interface that can be used for asynchronous serial data communication used in applications such as modems, Local Area Network (LAN) and industrial automation. The purpose of UARTs is to provide a means of communication between two devices over a serial connection, with each device controlling its own set of data signals. The XR88C92IV-F is a single-chip UART with a wide range of applications in a variety of systems.This UART is designed to control the transfer of data between two devices. It is designed to work with devices such as printers and displays, as well as providing additional functions such as auto-detection of the data format and error correction. The chip is also capable of generating a clock signal, which is used by the host devices to synchronize. The XR88C92IV-F is able to support serial communication protocols such as RS232, RS422 and RS485, as well as providing data rates of up to 1Mbps.The XR88C92IV-F supports both synchronous and asynchronous communication, with the latter being the most common. Synchronous communication requires a clock signal and data to be transmitted simultaneously, while the asynchronous protocol does not require a clock signal. With asynchronous communication, the receiver uses a start bit for the receiver to start and acknowledge the transmission, and a stop bit for the receiver to indicate the transmission is concluded.The XR88C92IV-F features a transmit data register (TDR), which is used to send data to the receiver. The TDR contains a number of bits depending on the number of data bytes that need to be sent. The data bits in the TDR are first transmitted by issuing the write signal by the transmitting device. The microcontroller then sends the data bits corresponding to the TDR values. Upon reception of the data, the receiver will read the data bits one at a time.The XR88C92IV-F also has a receive data register (RDR) which is used to store the data sent by the transmitting device. The RDR contains the same number of bits that were set in the TDR by the transmitting device. The RDR can be used to store up to 8 bytes of data, which can be read by the microcontroller. When the data has been read from the RDR, the RDR value is cleared and the data can be processed by the microcontroller.The XR88C92IV-F also has an interrupt enable register, which allows the microcontroller to receive an interrupt from the UART. This allows the microcontroller to receive data from the UART even when the microcontroller is not actively executing instructions. This is useful for applications such as modems, LANs and other industrial automation applications.The XR88C92IV-F is capable of providing a wide range of applications, from modems to LANs and industrial automation systems. This UART offers superior performance, easy setup and compatibility with a wide range of devices. Its wide data rates and variable lengths of data make it an ideal solution for applications that require reliable data transfer.

The specific data is subject to PDF, and the above content is for reference