XT600C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDT) are a type of suppression device designed to protect sensitive and valuable electronic components from lightning strikes, power cuts and direct contact with power lines. The XT600C is one of these devices and has a number of different applications. This article provides an overview of the working principle of XT600C and the different applications of the device.

Working Principle of XT600C

XT600C is designed to shunelectric currents when an overvoltage occurs. To do this, the XT600C uses a Gas Discharge Tube (GDT). A GDT is essentially a tube filled with gas and two electrodes. When the voltage between the electrodes exceeds the GDT’s trigger point, an electric arc is discharged, which carries the overvoltage away. In order to provide good protection, the GDT’s trigger point must be greater than the maximum expected voltage. Therefore, different GDTs are designed for different voltages.

Once the GDT triggers, the XT600C begins to conduct the surge current. The surge current is then absorbed by internals resistors embedded inside the XT600C. As the surge current dissipates, the XT600C returns to its original state and is ready to handle a similar shock in the future.

Applications of the XT600C

The XT600C has a number of useful applications, including:

• Lightning protection: The XT600C can provide effective lightning protection to electrical devices and prevent serious damage from lightning strikes.
• Power cuts: The XT600C is also effective at preventing power outages caused by power cuts.
• Direct contact with power lines: The XT600C is also effective at preventing short circuits caused by direct contact with power lines.

Conclusion

The XT600C Gas Discharge Tube Arresters is an essential device for protecting valuable electronics from overvoltage, lightning strikes, power cuts and direct contact with power lines. Its working principle is based on a GDT, which triggers when the voltage between its electrodes exceeds its trigger point. The XT600C then absorbs the surge current and returns to its normal state once the current dissipates. The XT600C has a wide range of applications and is a valuable tool for any organization looking to protect its electronic components from damage.

The specific data is subject to PDF, and the above content is for reference