Y1712V0580FD9L

Number of Pins:	4
Height - Seated (Max):	0.413" (10.49mm)
Size / Dimension:	0.575" L x 0.160" W (14.61mm x 4.06mm)
Supplier Device Package:	--
Package / Case:	Radial - 4 Leads
Mounting Type:	Through Hole
Applications:	Voltage Divider (TCR Matched)
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±0.2ppm/°C
Power Per Element:	300mW
Series:	300191Z
Resistor-Ratio-Drift:	±0.1 ppm/°C
Resistor Matching Ratio:	±0.005%
Number of Resistors:	2
Tolerance:	±1%
Resistance (Ohms):	60k
Circuit Type:	Voltage Divider
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The Y1712V0580FD9L resistor network and array is a product of the Yageo company. It is an integrated high-power resistor network array, consisting of 1/4W resistors connected in parallel, with 8 resistors connected to a single terminal. The Y1712V0580FD9L corresponding to its part number is an 8-pin, 0.5 W black body package, with a single terminal to 8 pins.

Application Fields

The Y1712V0580FD9L is used in a variety of applications. It can be used as a shunt resistor in power supplies, providing a voltage divider network for accurate voltage control or current sensing devices. It can also be used as a bus termination resistor array, providing an easy way to terminate high-speed differential signal lines. Additionally, the Y1712V0580FD9L can be used as a single resistor array in RF and IF filter applications, allowing multiple high frequency signals to be combined without having to hand solder each and every resistor in place.

Working Principle

The Y1712V0580FD9L resistor network array follows a specific working principle. When placed between two nodes of a circuit, the resistor network will act as a voltage divider. It will divide the voltage to the 8 terminal pins, with each pin equal to one part of the total voltage. This voltage divider creates a ladder of resistive values, which can be used to accurately measure the voltage between two nodes. The resistor network array of the Y1712V0580FD9L also allows for current control. The resistor network provides a shunt for excessive current, providing a simple and effective way to limit the current to a desired level. The network can also be used for current sensing applications, providing precise and accurate current measurements.

Conclusion

The Y1712V0580FD9L resistor network array is a high-power integrated resistor network array, consisting of 8 1/4W resistors connected in parallel. It is used in a variety of applications, including power supplies, buses, RF and IF filter applications, and as a voltage divider. It follows a specific working principle, allowing for accurate voltage and current control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description