Y1719V0467DB9L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistors networks and arrays have been around for many years and are useful for a range of applications where the individual component values or complex circuits must be quickly reconfigured, rather than having to buy or build a new circuit each time. The Y1719V0467DB9L is a series of pin-grid-array components that are specifically designed for this purpose.

The Y1719V0467DB9L is a nine-pin, two-row, surface-mount package with 3.5-mm pin pitch and 9 mm x 9 mm body size. It consists of a bridge network of 18 surface-mount resistors, where 8 of the pins are used as inputs for opening and closing the bridge, and the remaining pin is used as the output. The resistor installed in each position of the bridge is 15 kilohm.

The primary application of Y1719V0467DB9L is multiplexer circuits, which allow data routing among multiple input/output channels. It is used in many applications such as remote controlling, device/node communication, signal conditioning, and noise suppression.

The Y1719V0467DB9L is based on a bridge network formed by a set of resistors connected in parallel, so that each component in the bridge is differentially connected to the signal sources and the load. This allows the bridge configuration to be easily changed by adjusting the resistance value of the resistors connected in the bridge network.

The resistance values of the Y1719V0467DB9L are adjustable by using the input pins to open and close the bridge network, allowing the value of the bridge\'s resistance to be set. The output is then taken from the output pin, which is the average of all the parallel resistors.

The Y1719V0467DB9L can be used in combination with other components such as capacitors and inductors to create circuits with more complex functionality such as filters, signal attenuators, or even antennas. The components can be easily adjusted to provide different levels of attenuation or to create various filter responses.

The Y1719V0467DB9L can also be used in analog and digital transceiver circuits to create adjustable impedance matching networks or adjustable gain controls. This is especially useful in circuits that require a dynamic adaptation of the input and output levels between the different stages.

The Y1719V0467DB9L is an excellent choice for many applications where the circuit needs to be quickly and easily reconfigured, such as multiplexers and impedance matching circuits. Its adjustable bridge network allows for a wide range of possibilities and the components are all small enough to fit into even the most compact devices.

The specific data is subject to PDF, and the above content is for reference