YC248-FR-07110RL

Series:	YC248
Packaging:	Tape & Reel (TR)
Part Status:	Active
Circuit Type:	Isolated
Resistance (Ohms):	110
Tolerance:	±1%
Number of Resistors:	8
Resistor Matching Ratio:	--
Resistor-Ratio-Drift:	--
Number of Pins:	16
Power Per Element:	62.5mW
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Applications:	DDRAM, SDRAM
Mounting Type:	Surface Mount
Package / Case:	1606, Convex, Long Side Terminals
Supplier Device Package:	--
Size / Dimension:	0.157" L x 0.063" W (4.00mm x 1.60mm)
Height - Seated (Max):	0.022" (0.55mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays A resistor network, commonly referred to as a resistor array, is one type of electronic device that uses resistors in order to control and regulate electrical currents. It is a type of passive electronic component that is made up of multiple resistors that are connected in either a parallel or series manner. This type of device is often designed for specific tasks such as voltage regulation and filtering. A specific type of resistor network, the YC248-FR-07110RL, is a widely used device in applications such as power supplies, controllers, signal conditioning systems, and audio systems.The YC248-FR-07110RL resistor network is an eight-resistor array with 110 ohms of resistance per resistor. It is built using a pair of four-resistor array devices connected in series, where each resistor pair is connected in a parallel configuration. This type of resistor network has several advantages compared to other types of resistor networks. For example, it is very small in size and has a low component count. It is also able to handle higher currents compared to other types of resistor networks.The working principle of the YC248-FR-07110RL resistor network is fairly simple. When a voltage is applied to one side of the network, the current will divide between each individual resistor in the network. The total current passing through the network is the same as the current on the first side of the network. This division of the current is called the voltage-division rule. In the case of the YC248-FR-07110RL, the total resistance of the network is divided between each of the eight parallel resistors, creating a scaled resistance value for each resistor. This allows the device to be used for voltage dividing and current limiting.The YC248-FR-07110RL resistor network is a versatile component that is used in a wide variety of applications. It is most commonly used in power supplies, controllers, signal conditioning systems, and audio systems. In power supplies, the YC248-FR-07110RL is used to regulate and control the voltage and current. For example, in a large power system the device can be used to regulate the power input and output, preventing the system from drawing too much power.In controllers, the YC248-FR-07110RL is often used to provide a scaled resistance value, which in turn is used to determine the control signal. For example, a controller could use the device to set the current limit or power output of a motor. In signal conditioning systems, the device is often used to filter out any high-frequency signals and only allow low-frequency signals to pass through the network. In audio systems, the device is often utilized to block any high frequency noise signals while still allowing the desired audio signal to pass through the device.In conclusion, the YC248-FR-07110RL resistor network is a widely used device in numerous applications. It is composed of a pair of four-resistor array devices that are connected in series while each resistor pair is connected in a parallel configuration. This type of resistor network has several advantages over other types of resistor arrays, such as its small size, low component count, and ability to handle higher currents. It is most commonly used in power supplies, controllers, signal conditioning systems, and audio systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description