YC248-FR-07113KL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are typically used in circuit designs when groups of resistors are needed for power, voltage or current limiting applications. They can help form a desired voltage divider configuration or a specific combination of other electrical characteristics. In AC circuits, they can provide impedance matching to help improve signal fidelity.

The YC248-FR-07113KL is a 5-pin single-in-line (SIL) specific resistor network. It is made up of three 5-kOhm resistors (R1, R2 and R3). It has a surface mount package with a width of 4.5mm and a pitch of 1.27mm. It is rated for a maximum power dissipation of 250mW and an operating temperature range of -55 to +125 degrees Celsius.

The YC248-FR-07113KL is used mainly as a voltage divider in circuits such as power amplifiers. It helps to provide a stable, predictable output voltage. The input voltage is divided equally by each resistor, providing a reliable output voltage. This resistor network can also be used to provide a specific combination of resistance values, as desired in the design of a circuit.

The YC248-FR-07113KL resistor network works on Ohm\'s law principle. In this case, the circuit current will travel through each of the three resistors, and the output voltage is determined by the formula: Vout = Vin * (R1 / (R1 + R2 + R3)). If the input voltage is kept constant, then varying the resistance values of the three resistors will cause the output voltage to vary accordingly.

The YC248-FR-07113KL resistor network is also used for impedance matching purposes in AC circuits. The three resistors in the network are used to provide a balanced load, meaning that the input and output impedances are matched over a certain frequency range. This helps to reduce signal interference and provide a reliable, consistent circuit performance.

Due to its small size, low price and versatility, the YC248-FR-07113KL resistor network has become a popular choice for many circuits. It provides reliable output voltages and can also help with impedance matching in AC circuits, making it a valuable component in today\'s electronic designs.

The specific data is subject to PDF, and the above content is for reference