YC248-FR-07649KL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks are electronic components made up of two or more resistors connected in a series or parallel circuit. The YC248-FR-07649KL is one such resistor network. This part is a 6-pin surface mounted formed leadless chip carrier (LCC) resistor network designed for a variety of general-purpose applications, including signal switching, current sensing, amplifying, and voltage limiting.

Unlike individual resistors, resistor networks are designed with a fixed value. This means that the exact resistance of the network can be calculated, and it will remain constant over time and temperature changes. The YC248-FR-07649KL, for example, offers a resistance range of 10-150K ohms.

The YC248-FR-07649KL resistor array has six resistors in series, each with a resistance of 10K ohms. The total resistance of the network will thus be 10 x 6, or 60K ohms. This network is also known as a tree network, because of the way the resistors are arranged in the part.

In general, the YC248-FR-07649KL has two major applications. The first is for signal switching, and the second is for current sensing. In signal switching applications, the resistor network can be used to direct signals within a circuit or switch them on or off depending on the amount of current passed through it. This makes it an ideal choice for use in digital circuits such as logic gates.

In current sensing applications, the YC248-FR-07649KL can be used to sense the amount of current flowing through the circuit. This can be used to monitor the performance of a circuit or protect it from overloading. The resistor network can also be used to amplify signals or limit voltage.

The principle behind the YC248-FR-07649KL is simple. When current flows through the network, it splits into two paths; one with a higher resistance and one with a lower resistance. The current flows through both paths, but the proportion of current flowing through each path depends on the resistance of each resistor within the network. This can be used to change the voltage and current in a circuit, as well as to sense, amplify, and switch signals.

In conclusion, the YC248-FR-07649KL is an 8-pin surface mounted formed leadless chip carrier resistor network that can be used for signal switching, current sensing, amplifying, and voltage limiting. It has a fixed resistance range of 10-150K ohms, and the principle behind it is the splitting of current into two paths depending on the resistance of each resistor in the network. This makes it an essential component in digital circuits, as well as in applications such as sensors and amplifiers.

The specific data is subject to PDF, and the above content is for reference