Z0410DF 1AA2

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Triac Type:	Standard
Voltage - Off State:	400V
Current - On State (It (RMS)) (Max):	4A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	20A, 21A
Current - Gate Trigger (Igt) (Max):	25mA
Current - Hold (Ih) (Max):	25mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-202 Long Tab
Supplier Device Package:	TO-202
Base Part Number:	Z04

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs: Z0410DF 1AA2 Application Field and Working Principle

Thyristors and TRIACs form two critical components of many commercial and industrial applications. This article focuses on the Z0410DF 1AA2, a medium power SCR, or silicon controlled rectifier, which can be found in many industrial applications, particularly those involving motion control.The Z0410DF 1AA2 is a 400 Volt, 10 Amp device. It is capable of reliably withstanding reverse voltage up to 600 Volts. This SCR is designed with a three-terminal construction, consisting of an anode, a cathode, and a control gate. When a sufficient voltage is applied across the anode and the cathode, the thyristor will switch on, allowing for current to flow between the anode and the cathode. The control gate is used to set the desired conduction state of the thyristor, allowing it to be controlled either manually or by applying a signal through a computer-based control system.The Z0410DF 1AA2 is particularly well-suited for motion control applications, such as in motor control. In these applications, the thyristor can be used to control the speed and position of a motor, offering precise control of the motor’s operation and efficiency. The thyristor can also be used to provide a short burst of extremely high power, as might be needed to break inertia while starting a motor.The Z0410DF 1AA2 also finds use in power electronics due to its ability to effectively limit the transfer of power across a circuit. Additionally, when used with a static switch, or power switch, the thyristor can be used for power control by allowing for the control of multiple points of a circuit. This is useful for applications involving the control of the power output from a power source, such as in an AC or DC supply.The working principle of the Z0410DF 1AA2 is relatively simple. When power is applied to its anode and cathode, a silicon material inside the device will be activated, allowing electricity to flow between the two. As the power level increases, an internal gate, which is manipulated through the control gate, will open, allowing for a greater current to flow between the two, up to its 10 Amp rating. The gate can also be opened and closed manually, further controlling the device’s operation.In short, the Z0410DF 1AA2 is an incredibly versatile component, suitable for both motor control and more intricate power control applications. With its rated voltage of 400 Volts and 10 Amp capacity, the Z0410DF 1AA2 offers precise control of many electrical systems and a reliable way to control the flow of power.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description