ZHCS350TC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ZHCS350TC is a single-phase high voltage full-wave bridge rectifier. It is widely used in power supply circuits for high-voltageapplications like industrial and commercial AC to DC power supplies, motor speed controls, and other general purpose high voltage circuits. The ZHCS350TC is designed to provide an all-in-one solution for high-voltage power conversion and is ideal for applications that require high efficiency, robustness and long life.

The ZHCS350TC utilizes a full-wave bridge rectifier circuit consisting of four diodes connected in a bridge configuration. This type of rectifier circuit is commonly used to convert AC power to DC power, as the diode bridge is able to convert alternating current (AC) to direct current (DC). The output of the bridge rectifier is a pulsating DC voltage that has the same frequency as the AC input, but it is non-symmetrical and contains only positive voltages. By adding a filter component to the output of the bridge rectifier, the non-symmetrical pulses can be filtered out and a pure DC voltage can be obtained.

The ZHCS350TC has a peak reverse voltage (VRRM) of 350V and a forward continuous current (IF(AV)) of 7A. The device also has a maximum forward surge current (IFSM) of 30A and a maximum reverse recovery time (trr) of 6.0μs. It has a high temperature rating and can operate at temperatures up to 125°C. It is available in an industry-standard SIP (single inline package) and is RoHS compliant.

The working principle of the ZHCS350TC is quite simple. When an AC voltage is applied to the input of the bridge rectifier, the diodes conduct in pairs, allowing current to flow through two of the diodes while the other two diodes are in the reverse bias state. This causes a full-wave rectified voltage to be output from the bridge rectifier. As the input voltage alternates between positive and negative, the current in the bridge rectifier switches between positive and negative, allowing the output voltage to be positive at all times.

In order to obtain a pure DC output from the bridge rectifier, a filter component must be added. Typically, this component is a capacitor which is connected in parallel with the load. The capacitors can absorb the current pulses produced by the rectifier and smooth out the output voltage. The output voltage of the rectifier will be a DC voltage that is proportional to the peak of the AC input voltage.

The ZHCS350TC has found great success in the industrial, commercial and consumer markets. It is well suited for applications such as AC to DC power supplies, motor speed control, lighting control, and other high voltage circuits. Its high efficiency, robustness and long life make it an ideal choice for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference