ZMY13-GS18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes, also known as semiconductor diodes, are devices used mainly to convert alternating current (AC) to direct current (DC). This type of diode is called a Zener diode, and the specific type in this article is the ZMY13-GS18. Zener diodes are used for many applications, including regulating voltages, mobile device charging, and clamping circuits.

A ZMY13-GS18 Zener diode is a single PN-junction rectifier. It is usually constructed of a semiconductor material such as silicon, selenium, or germanium. The electrolyte in the diode is surrounded by an anodized metal case. The diode features rectifying characteristics and a built-in voltage regulator that allows voltage spikes to be clamped. The diode has a reverse breakdown voltage of 13 volts (Vr) at a maximum current of 18 milli amps (mA).

The ZMY13-GS18 Zener diode is mainly used for voltage regulation, primarily to limit the maximum voltage applied to a load. The Zener diode works by allowing a current to flow through only one direction (from the anode to the cathode). When a voltage greater than the rated breakover voltage of the diode is applied, the diode conducts in both directions, causing the voltage to remain constant. This voltage regulation is useful in controlling the power supply in various devices.

The ZMY13-GS18 Zener diode can also be used to protect a system against electrical transients. Electrical transients can occur in a system when a sudden surge of energy causes a voltage spike. The Zener diode will allow a current to flow through the device, thereby limiting the spike and protecting the system from damage.

The ZMY13-GS18 Zener diode is a cost-effective and versatile device that is used in a variety of applications. It is used in a variety of power supply circuits to regulate the output voltage, as well as in mobile device charging circuits. It is also used to provide protection for sensitive electronic components by clamping voltage spikes. Finally, the Zener diode can be used to provide an additional level of safety in applications where static electricity may be a factor.

The specific data is subject to PDF, and the above content is for reference