​The characteristics of Holzer element

On 2018-11-03 15:08:21  in Memory

​The characteristics of Holzer element

The materials used in Holzer devices include germanium,silicon,InSb,InAs,GaAs and so on ...

Diode rectifier filter circuit,Diode half wave rectifier circuit

On 2018-09-12 13:00:54  in Memory

Diode rectifier filter circuit,Diode half wave rectifier circuit

Power plant to send 50 Hz AC, after long-distance transmission, to the user is still 50 Hz AC, it is usually sent to industrial users 380 V three-phase AC, to ordinary civil users 220V single-phase AC. ...

Brief analysis of the principle and function of transmission

On 2018-11-20 10:38:35  in Memory

Brief analysis of the principle and function of transmission

The transmission is used to change the speed and torque of the engine. It can fix or change the transmission ratio of the output shaft and the input shaft in different stages. It is also called the transmission ...

the structure,type and detection method of the loudspeaker

On 2018-11-03 15:12:34  in Memory

the structure,type and detection method of the loudspeaker

one The structure of the loudspeaker.The loudspeaker,also known as the horn,is an electro-acoustic conversion device that converts the analog voice telephone number into a sound wave ...

what is an infrared light emitting diode?

On 2018-10-26 16:45:24  in Memory

what is an infrared light emitting diode?

determine the order of the arrangement of the pins.The multimeter is placed in the R*1 thousand euro file ...

Headphones and piezoceramic buzzers

On 2018-11-03 15:17:06  in Memory

Headphones and piezoceramic buzzers

Headset is also an electro-acoustic conversion device,which is similar in structure to an electric speaker,it is also composed of magnet,voice coil,vibrating diaphragm, etc,but the voice coil of the earphone is mostly fixed ...

Comparative analysis of LDO linear regulator and DC/DC device

On 2018-11-20 10:33:07  in Memory

Comparative analysis of LDO linear regulator and DC/DC device

​LDO is a low dropout linear regulator, compared with the traditional linear regulator. Traditional linear regulators ...

The main parameters of the first,triode

On 2018-11-01 14:25:02  in Memory

The main parameters of the first,triode

The current amplification factor is the current magnification,which is used to indicate the amplifying power of the transistor.According to the working state of the triode ...

​How to detect the BTG thyristor?

On 2018-10-29 15:08:36  in Memory

​How to detect the BTG thyristor?

Judging the electrode to place the multimeter in RX1K2 block,and the red and black stylus rotation to connect a pair of electrodes,when a pair of pins is measured to be low resistance ...

What is an optical coupler?

On 2018-10-27 10:41:35  in Memory

What is an optical coupler?

Optical coupler also known as photoelectric isolator,referred to as optocoupler. Optical couplers use light as a medium to propagate the Telecom number ...

the detection of the resistor

On 2018-10-31 10:55:57  in Memory

the detection of the resistor

Will be two pen ( regardless of the positive and negative ) are connected with the two ends of the resistor can be connected to measure the actual resistance value ( in order to improve the measurement accuracy ...

how to detect and repair the photoelectric switch?

On 2018-10-27 10:40:06  in Memory

how to detect and repair the photoelectric switch?

The detection method of the transmitting tube and the receiving tube is as follows. ...

what is an infrared receiver?

On 2018-10-26 16:53:35  in Memory

what is an infrared receiver?

The infrared receiving tube is a semiconductor device used to receive the infrared light wave generated by the infrared light emitting diode and convert it into electrical signal. ...

​how to detect the discoloration LEDs?

On 2018-10-26 16:40:18  in Memory

​how to detect the discoloration LEDs?

As shown in Figure 5-18,a circuit for detecting a discoloration light emitting diode (LEDs),a multimeter is placed in the RX10k2 block,and the two pin is connected. ...

How to detect fast recovery, ultrafast recovery diode?

On 2018-10-26 16:05:55  in Memory

How to detect fast recovery, ultrafast recovery diode?

The method of measuring fast recovery and ultrafast recovery diode with multimeter is basically the same as the method of detecting plastic sealed silicon rectifier diode. ...

How can Advance innovations improve the efficiency of data center memory?

On 2019-08-03 10:22:37  in Memory

How can Advance innovations improve the efficiency of data center memory?

This article describes the characteristics of the memory. ...

Output Curve of Field Effect Transistor

On 2018-11-23 10:36:28  in Memory

Output Curve of Field Effect Transistor

If the internal resistance of the test voltage is also very small, the tube will burst undoubtedly. ...

What is a bidirectional thyristor?

On 2018-10-29 14:25:17  in Memory

What is a bidirectional thyristor?

Bidirectional thyristor(TRIAC)is a new type of semiconductor device developed on the basis of one-way thyristor ...

Using integrated passive components in the micro-module SIP

On 2018-11-21 11:20:07  in Memory

Using integrated passive components in the micro-module SIP

Integrated passive devices are nothing new in our industry – they have been around for a long time and are well known. ...

Commonly used connector

On 2018-11-01 17:07:09  in Memory

Commonly used connector

The classification connector of the connector is also called a connector, which is usually composed of a plug ( also known as a male plug ) and a socket ( called a female plug ) ...

Common parameters

On 2018-10-30 11:49:42  in Memory

Common parameters

peak height refers to the peak soldering PCB to eat tin height ( Figure 2-1 1 43 ) ...

​how to detect a dual base diode?

On 2018-10-26 17:10:47  in Memory

​how to detect a dual base diode?

discriminant emitter E. When the multimeter is placed in the RX1k2 block and the positive and reverse resistance values between any two electrodes are equal (2~10k2) with two forms ...

Wave soldering technology is a mature electronic assembly process

On 2018-10-30 11:33:30  in Memory

Wave soldering technology is a mature electronic assembly process

the process is loading plate,coating flux,preheating,wave soldering,hot air knife treatment,cooling and unloading plate ...

How do you choose isolation architectures, circuits, and components in power inverter applications?

On 2018-11-21 10:57:27  in Memory

How do you choose isolation architectures, circuits, and components in power inverter applications?

Both motor and power control inverter designers have the same problem of isolating control and user interface circuits from dangerous power line voltages. ...