Commonly used connector
On 2018-11-01 17:07:09 in Memory
The classification connector of the connector is also called a connector, which is usually composed of a plug ( also known as a male plug ) and a socket ( called a female plug ) ...
the structure,type and detection method of the loudspeaker
On 2018-11-03 15:12:34 in Memory
one The structure of the loudspeaker.The loudspeaker,also known as the horn,is an electro-acoustic conversion device that converts the analog voice telephone number into a sound wave ...
Common parameters
On 2018-10-30 11:49:42 in Memory
peak height refers to the peak soldering PCB to eat tin height ( Figure 2-1 1 43 ) ...
Wave soldering technology is a mature electronic assembly process
On 2018-10-30 11:33:30 in Memory
the process is loading plate,coating flux,preheating,wave soldering,hot air knife treatment,cooling and unloading plate ...
How do you measure infrared light emitting diodes?
On 2018-10-26 16:48:19 in Memory
When detecting infrared light emitting diodes,there is a big difference between the pointer type multimeter and the digital multimeter ...
how to detect and repair the photoelectric switch?
On 2018-10-27 10:40:06 in Memory
The detection method of the transmitting tube and the receiving tube is as follows. ...
What is a bidirectional thyristor?
On 2018-10-29 14:25:17 in Memory
Bidirectional thyristor(TRIAC)is a new type of semiconductor device developed on the basis of one-way thyristor ...
the detection of the resistor
On 2018-10-31 10:55:57 in Memory
Will be two pen ( regardless of the positive and negative ) are connected with the two ends of the resistor can be connected to measure the actual resistance value ( in order to improve the measurement accuracy ...
Output Curve of Field Effect Transistor
On 2018-11-23 10:36:28 in Memory
If the internal resistance of the test voltage is also very small, the tube will burst undoubtedly. ...
How to measure the color LED dot matrix display?
On 2018-10-29 15:33:54 in Memory
The color LED dot matrix display is the same as monochrome.You can use short columns or rows of methods to detect,just a little cumbersome operation ...
how to detect a photosensitive transistor?
On 2018-10-27 11:13:49 in Memory
the pin of the pin identifies the pin arrangement of the photosensitive transistor as shown in Figure 6-8,the foot near the pin or the longer one is the emitter E,and the far or shorter foot of the foot is the collector C ...
what is a double base diode (single junction transistor)?
On 2018-10-26 17:09:25 in Memory
Double base diode,also known as single crystal transistor (UJT)is a three terminal semiconductor device with only one PN junction.the circuit symbol,internal structure and equivalent circuit of double base diode. ...
Using integrated passive components in the micro-module SIP
On 2018-11-21 11:20:07 in Memory
Integrated passive devices are nothing new in our industry – they have been around for a long time and are well known. ...
The characteristics of Holzer element
On 2018-11-03 15:08:21 in Memory
The materials used in Holzer devices include germanium,silicon,InSb,InAs,GaAs and so on ...
The main characteristic of the diode is Danxian
On 2018-10-30 10:56:52 in Memory
It refers to the maximum positive current allowed to pass through the diode during long-term operation,which is related to PN junction area and external heat dissipation conditions. ...
how to detect the LED emission tube?
On 2018-10-26 16:31:21 in Memory
The use of multimeter to detect LED luminous platoon is mainly to check whether the LEDs are good ...
How to detect fast recovery, ultrafast recovery diode?
On 2018-10-26 16:05:55 in Memory
The method of measuring fast recovery and ultrafast recovery diode with multimeter is basically the same as the method of detecting plastic sealed silicon rectifier diode. ...
Comparative analysis of LDO linear regulator and DC/DC device
On 2018-11-20 10:33:07 in Memory
LDO is a low dropout linear regulator, compared with the traditional linear regulator. Traditional linear regulators ...
how to detect a varactor?
On 2018-10-26 17:08:18 in Memory
Because the positive resistance of the varactor diode is larger,the multimeter is placed in the RX 10k2 block,the red form is connected to the positive pole ...
Structure and characteristics
On 2018-11-01 16:47:41 in Memory
LED digital tube also known as semiconductor digital tube ( Figure 1-1-5 ),it is a number of light-emitting diodes arranged in a fixed pattern and packaged together the most commonly used digital display one of the devices ...
Headphones and piezoceramic buzzers
On 2018-11-03 15:17:06 in Memory
Headset is also an electro-acoustic conversion device,which is similar in structure to an electric speaker,it is also composed of magnet,voice coil,vibrating diaphragm, etc,but the voice coil of the earphone is mostly fixed ...
The main parameters of LED
On 2018-10-31 11:11:54 in Memory
The main parameters of LED include the maximum working current Im and the maximum reverse voltage Um ...