CD4060BM96 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD4060BM96 is a type of logical circuit that can be used for a variety of purposes. It is commonly used for counting, dividing, and other logical operations, but is also useful for a wide range of applications. This type of circuit is quite versatile and can be used in all types of applications from simple logic operations to complex signal processing. In this article, we will discuss the application fields and working principle of the CD4060BM96 in detail.

Application Fields of CD4060BM96

The CD4060BM96 circuit is primarily used in the applications that require counting or dividing input signals. This versatile chip is often used to measure pulse widths, frequency measurements, and similar operations. It can also be used in signal processing applications such as frequency dividing, digital decoding, signal amplifying, signal analysis, and various types of control systems. This device also enables a user to perform logic operations such as data manipulation, logic sequencing, logic complementing, logic comparing, logic generating, shift/store range, and test vector generators. This device can be used in applications such as automotive, health care, medical, and consumer gadgets.

Working Principle of CD4060BM96

The working principle of the CD4060BM96 is based on binary counter logic. This chip comprises a chain of cascaded flip-flops that can count up to a maximum of 65,536 (16 bits). Depending on the type of application, each stage can be preset with a certain logic value in order to achieve the desired operation. As each stage of the counter advances, its output is fed to the next stage, which in turn cascades its output to the next stage, achieving a count of 65,536. This mode of counting is known as temperature compensation. This method is applied to counteract any temperature variations that are present within the circuit.

This circuit also comes with several different input/output pin options that can be configured to achieve different types of counting. These pins can be used to logic inputs, enable/disable terminals, clock input, reset input, and an output terminal. The enable and reset pins can be used to selectively enable or disable the counting operations. The output terminal will contain the count value of the chip at any point in time. It is important to note that the count value of these chips is specified from left to right, with the left-most bit being the most significant bit and the right-most bit being the least significant bit.

In addition to its counter logic, the CD4060BM96 is also capable of frequency division. The frequency division operation is divided into two main sub-operations. Firstly, a counter is clocked at a certain frequency, known as the divider. This divider can then be adjusted to produce a higher or lower frequency, depending on the application. The second sub-operation of frequency division is the modulation of the output signal. This is achieved by passing an external modulation signal, such as a pulse, through the chip. This modulates the output signal output at the desired frequency.

Conclusion

In conclusion, the CD4060BM96 is a versatile device that is capable of performing several different logical operations. This chip can be used for counter operations, frequency division, digital decoding, signal amplifying, signal analysis, and various types of control systems. This device also offers a wide range of pin connections, enabling the user to configure the chip for their specific application. As a result, the CD4060BM96 is a highly adaptable logic device that is suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference