LT1218LCS8#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LT1218LCS8#TRPBF is a precision low power instrumentation amplifier, designed for a wide range of industrial and consumer applications. It is designed to provide a high degree of accuracy and system stability over a wide range of input conditions. The LT1218LCS8#TRPBF has a single-ended output and is ideal for applications using slow speed sensors such as temperature, pressure, and strain gages.

The LT1218LCS8#TRPBF can operate with input voltages from as low as 0.1V to 32V. It also offers wide temperature range of -40°C to +85°C. Low power consumption makes the device easier to interface with traditional power sources.

The LT1218LCS8#TRPBF boosts the gain of signals to a level sufficient to drive analog-to-digital (ADC) converters and higher level processing circuitry. The amplifier takes up to a 2kHz signal bandwidth and has a gain-of-one mode.

The LT1218LCS8#TRPBF offers excellent accuracy, where the gain drift, or the ratio of gain change versus temperature, is less than 0.005%/°C. The LT1218LCS8#TRPBF features low power and low noise, making it very suitable for process control, biomedical instrumentation, test and measurement systems, and other low power, high accuracy applications.

The LT1218LCS8#TRPBF’s working principle is quite simple. The instrumentation amplifier is composed of three operational amplifiers in a “bridge-like” configuration. The differential gain is given by: G =Av/R2, where Av is the open-loop gain of the first two integrated operational amplifiers and R2 is a Programmable Resistor (PR). To prevent oscillation, the resistor is usually chosen to be greater than 10 times the output or load impedance of the first amplifier.

The PR forms a voltage divider along with the gain resistor and sets the differential gain of the instrumentation amplifier. The gain voltage is then set by controlling the PR’s resistance, which is then fixed. Adjusting the gain voltage of the amplifier is done by either using a mechanical potentiometer or using a digital potentiometer.

In addition to this, the LT1218LCS8#TRPBF has built-in protection against offset and thermal drift. The amplifier includes offset adjustment, allowing to manually adjust the output voltage such that it is close to the output’s desired value. The LT1218LCS8#TRPBF also provides high input impedance and low output impedance, making it ideal for use with high source impedance and low load applications, such as resistance bridge amplifiers.

The LT1218LCS8#TRPBF is an ideal instrumentation amplifier for a range of industrial and consumer applications that require higher accuracy, low power, and wide temperature range. With its wide range of features and high level of accuracy, the LT1218LCS8#TRPBF is a great choice for applications ranging from low frequency signal conditioning to audio and instrumentation.

The specific data is subject to PDF, and the above content is for reference