Check for computer power problems

Last Update Time: 2018-12-04 10:55:29

1. Prepare a wire, whatever you can.

2. Remove the power supply from the computer and insert the wire into the green wire connector in the 24P plug on the power supply.

3. It is possible to insert the other end into the socket of any black line on the head of the power supply 24P. After plugging in, then connect the power cord to the row of seats.

4. After the two ends of the induction line are connected, look at the power supply fan. If it is a turn, you can be sure that the power is good.

5. The current of the small line on the 24P connector on the power supply is 5V. The power is not harmful to the human body, so don't be afraid.

The above method is just an approximate test method for the power supply.

This article is from ALLICDATA ELECTRONICS　LIMITED

<- Previous Next ->