0460121141-12-R0

Jumper Wires

Jumper wires are widely used in electronic circuits for connecting two points temporarily that need to be tested and adjusted. This application field is particularly useful for prototyping, debugging and maintenance of a circuit. Jumper wires usually consist of two ends connected by an insulated cable. At each end of the conductor, female or male connectors are used to link the temporary connection. The length and type of connectors vary, offering a variety of ways to build the perfect circuit.

For the 0460121141-12-R0 jumper wire, it consists of two soldered jumpers with 12 AWG leads. It has a rate voltage of 1000V and current rating of 30A. As a result, it is well-suited for heavier duty projects, making it suitable for electrical connections in systems with a large currant draw.

Working Principle

The working principle of a jumper wire is simple. It is used to temporarily bridge two points on a circuit board that need to be tested or adjusted. By connecting the two points, the current can be tested and the circuit can be controlled or debugged. The 0460121141-12-R0 jumper wire is designed to handle currents up to 30A, making it suitable for heavier duty projects.

Jumper wires can also be used to bridge two points on one circuit board that are not connected. In this way, it is possible to connect two circuits that would otherwise not be connected. This is useful for prototype design, debugging and maintenance.

Pre-Crimped Leads

Pre-crimp leads are wires that have already been crimped to a terminal. These are often used in the manufacturing and assembly of electronics. Pre-crimping leads eliminates the need for crimping the wire to the terminal, which can be difficult, time-consuming, and prone to mistakes. Instead, the wires can simply be inserted into the terminal and secured with a screw.

The 0460121141-12-R0 pre-crimp lead has 12 AWG leads and is rated to 1000V and 30A. This makes it suitable for higher current applications and is often used in power supplies, control panels, and other applications that require reliable connections.

Working Principle

The working principle of a pre-crimp lead is quite simple. It is used by inserting the lead into a terminal and fastening it with a screw. This creates a secure and reliable connection that is rated for higher current applications than normal. The 0460121141-12-R0 pre-crimp lead is designed to handle up to 30A of current, making it suitable for many applications.

Pre-crimped leads are also used in the assembly of electronics as they can be soldered directly to the PCB. This eliminates the need to crimp the wires to the terminal, saving time and ensuring a reliable connection. As a result, pre-crimped leads are quite popular in the electronics manufacturing industry.