Allicdata Part #: | 0500588000-04-Y1-ND |
Manufacturer Part#: |
0500588000-04-Y1 |
Price: | $ 0.43 |
Product Category: | Cable Assemblies |
Manufacturer: | Molex, LLC |
Short Description: | 4" PRE-CRIMP 3047 YELLOW |
More Detail: | Yellow 30 AWG Jumper Lead Socket to Cable (Round) ... |
DataSheet: | 0500588000-04-Y1 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
10 +: | $ 0.39942 |
100 +: | $ 0.30643 |
250 +: | $ 0.27980 |
500 +: | $ 0.26647 |
1000 +: | $ 0.21983 |
Series: | PicoBlade™ |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Contact End: | Socket to Cable (Round) |
Moisture Sensitivity Level (MSL): | -- |
Length: | 4.00" (101.60mm) |
Wire Gauge: | 30 AWG |
Contact Finish: | Tin |
Color: | Yellow |
Contact Finish Thickness: | 35.4µin (0.90µm) |
Number of Rows: | 1 |
Number of Conductors: | 1 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
0500588000-04-Y1 Application Field and Working Principle
0500588000-04-Y1 is a type of jumper wire, pre-crimped lead product. It is widely used in electronic products or new equipment installed in order to improve the performance of the products.
Application Field
0500588000-04-Y1 is applicablefor us in a variety of fields. It is usually used in the assembly of printed circuit boards (PCBs) and electronic equipment. It is used toconstruct a bridge between two components in order to provide electrical and mechanical connections. It can also be used as a connector in accessories that require connection with batteries, remote controls, computers, etc. 050000588000-04-Y1 is suitable for use in circuit-opening, buried point welding and marking.
Working Principle
Jumper wires, pre-crimped leads are crimped to secure a consistent electrical contact and to adhere the jumper wires and leads to the other components. The working principle is as follows:
- The two components that are to be connected are placed on the crimping tool.
- The crimping pliers are then set to the right pressure and height depending on the thickness of the wires.
- The jumper wires, pre-crimped leads are then inserted between the two components.
- The pliers are compressed and a consistent electrical contact is made between the two components.
- The process is then repeated for each component.
The crimp should be strong and uniform across the entire length of the joint in order for the connection to be secure and reliable. In the event that the crimping is insufficient, the connection may be poor or the components can become loose.
Advantages
Jumper wires, pre-crimped leads has many advantages. It is a fast and efficient way to connect wires and other components, and it reduces the amount of time needed for assembly. It also reduces the chances of soldering errors that can occur with manual soldering. It is also more reliable than manual soldering as the connection is secure and uniform across the entire length of the lead. Furthermore, jumper wires, pre-crimped leads is more cost-effective than manual soldering, as it reduces the time and cost for assembly.
Disadvantages
Jumper wires, pre-crimped leads has some disadvantages. It requires special tools for crimping, so it is not suitable for DIY projects or small repairs. It is also more difficult to inspect the quality of the connection, as it is not possible to look inside the crimp. This can lead to unreliable connections if the crimping is not done correctly.
Conclusion
Jumper wires, pre-crimped leads are a fast and efficient way to connect wires and other components. It is widely used in the assembly of printed circuit boards and electronic equipment. It reduces the amount of time needed for assembly, eliminates soldering errors, and is more cost-effective than manual soldering. However, it requires special tools for crimping, and it is more difficult to inspect the quality of the connection.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
CVCO55CW-0250-0500 | Crystek Corp... | 18.52 $ | 189 | OSC VCO 250-500MHZ SMD .5... |
CVCO55CW-0500-1000 | Crystek Corp... | 18.83 $ | 27 | OSC VCO 500-1000MHZ SMD .... |
61127-0500LF | Amphenol FCI | 0.0 $ | 1000 | CONN PCMCIA CARD PUSH-PUL... |
71249-0500LF | Amphenol FCI | 0.0 $ | 1000 | CONN PCMCIA CARD PUSH-PUL... |
95548-0500LF | Amphenol FCI | 0.0 $ | 1000 | CONN PCMCIA CARD PUSH-PUL... |
P78A03-0500 | CUI Inc. | 2.57 $ | 342 | DC/DC CONVERTER 3.3V 2WLi... |
P78A05-0500 | CUI Inc. | 2.57 $ | 392 | DC/DC CONVERTER 5V 3WLine... |
LXML-PR01-0500 | LUMILEDS | -- | 6000 | LED LUXEON REBEL ROYAL SM... |
CLPFL-0500 | Crystek Corp... | 16.7 $ | 39 | FILTER LOW PASS 500MHZ SM... |
CHPFL-0500 | Crystek Corp... | 16.7 $ | 9 | HIGH PASS FILT 500 MHZ - ... |
0500LP15A500E | Johanson Tec... | -- | 28000 | FILTER LOWPASS UWB 500MHZ |
025-0500-000 | JAE Electron... | 0.25 $ | 1000 | CONN DUST CAP SZ 24/28 |
KTKK-0500 | TE Connectiv... | 0.0 $ | 1000 | CONN BACKSHELL ADPT SZ 8C... |
LPV2-0500DP | Bivar Inc. | 1.24 $ | 100 | LIGHT PIPE RIGID 2.01MM D... |
LPV2-0500FP | Bivar Inc. | 1.24 $ | 98 | LIGHT PIPE RIGID 2.01MM D... |
LPV3-0500DP | Bivar Inc. | 1.26 $ | 100 | LIGHT PIPE RIGID 2.92MM D... |
LPV3-0500FP | Bivar Inc. | 1.26 $ | 100 | LIGHT PIPE RIGID 2.92MM D... |
LPV4-0500DP | Bivar Inc. | 1.34 $ | 100 | LIGHT PIPE RIGID 3.91MM D... |
LPV4-0500FP | Bivar Inc. | 1.34 $ | 100 | LIGHT PIPE RIGID 3.91MM D... |
LHUV-0395-0500 | LUMILEDS | 10.4 $ | 1000 | EMITTER UV 400NM 1A WFDFN... |
LHUV-0400-0500 | LUMILEDS | 6.85 $ | 1000 | EMITTER UV 405NM 1A WFDFN... |
LHUV-0405-0500 | LUMILEDS | 4.33 $ | 1000 | EMITTER UV 410NM 1A WFDFN... |
LHUV-0410-0500 | LUMILEDS | 4.33 $ | 1000 | EMITTER UV 415NM 1A WFDFN... |
LHUV-0380-0500 | LUMILEDS | 0.0 $ | 1000 | LED UV/NUV SMDUltraviolet... |
LHUV-0390-0500 | LUMILEDS | 0.0 $ | 1000 | LED UV/NUV SMDUltraviolet... |
21458-20-2-0500-0104-1-TS | CNC Tech | 93.0 $ | 29 | CABLE 2COND 20AWG BLK/RED... |
21458-18-2-0500-0104-1-TS | CNC Tech | 134.91 $ | 106 | CABLE 2COND 18AWG BLK/RED... |
0500588000-02-B1 | Molex, LLC | 0.41 $ | 320 | 2" PRE-CRIMP 3047 BLACKBl... |
0500588000-02-R1 | Molex, LLC | 0.41 $ | 210 | 2" PRE-CRIMP 3047 REDRed ... |
0500588000-02-G1 | Molex, LLC | 0.41 $ | 140 | 2" PRE-CRIMP 3047 GREENGr... |
0500798000-02-B8 | Molex, LLC | 0.42 $ | 390 | 2" PRE-CRIMP 1852 BLACKBl... |
0500798000-02-Y8 | Molex, LLC | 0.42 $ | 370 | 2" PRE-CRIMP 1852 YELLOWY... |
0500588000-04-R1 | Molex, LLC | 0.43 $ | 920 | 4" PRE-CRIMP 3047 REDRed ... |
0500588000-04-W1 | Molex, LLC | 0.43 $ | 510 | 4" PRE-CRIMP 3047 WHITEWh... |
0500588000-04-B1 | Molex, LLC | 0.43 $ | 400 | 4" PRE-CRIMP 3047 BLACKBl... |
0500798000-03-R8 | Molex, LLC | 0.44 $ | 450 | 3" PRE-CRIMP 1852 REDRed ... |
0500798000-03-B8 | Molex, LLC | 0.44 $ | 275 | 3" PRE-CRIMP 1852 BLACKBl... |
0500798000-03-B6 | Molex, LLC | 0.44 $ | 400 | 3" PRE-CRIMP 1853 BLACKBl... |
0500798000-03-R6 | Molex, LLC | 0.44 $ | 380 | 3" PRE-CRIMP 1853 REDRed ... |
0500798000-08-Y6 | Molex, LLC | 0.44 $ | 240 | 8" PRE-CRIMP 1853 YELLOWY... |
JUMPER-H1504TR/A2015R/X 8"Red 24 AWG Jum...
6" PRE-CRIMP A1857/19 VIOLETViolet 18 AW...
JUMPER-H2730TR/C2016R/H2730TR 6"Red 22 A...
12" PRE-CRIMP A1858/19 REDRed 16 AWG Jum...
3" PRE-CRIMP A1857/19 BROWNBrown 18 AWG ...
11" PRE-CRIMP 1855/19 REDRed 22 AWG Jump...