0502128000-02-L1-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires, Pre-Crimped Leads

Jumper wires and pre-crimped leads are terms often used when talking about electrical wiring. Jumper wires are short lengths of electrical wire that can be used to bridge connections and make electrical circuits. Pre-crimped leads are wires with end contacts already attached, and are used to make permanent connections.

0502128000-02-L1-D Application Field and Working Principle

0502128000-02-L1-D is a jumper wire used in electronics engineering for testing or prototyping. This type of cable has an outer diameter of 0.5 millimeters and is available in various lengths. It allows quick connections between different circuits or components in a circuit, eliminating the need for soldering.

A jumper wire is typically made of very thin insulated copper wire that is twisted together, forming two separate ends. One end is typically terminated by a pin, jack, or other connector while the other end is bare, allowing it to be soldered. This type of wire is very flexible and can be used to quickly connect components in a circuit, eliminating the need for wiring by hand.

Jumper wires can be used for testing different circuits, and they are also often used to make sound-proof connections between components. The securely attached pre-crimper ends make sure that the wire is firmly held in place and is not drawn away from the circuit board when the jumper wire is adjusted. Jumper wires can be used to test or prototype a circuit, making sure that all components are securely connected before a permanent connection is made.

Pre-crimped leads are also commonly used in electronics engineering. These are insulated copper wires with pre-attached contact ends that are available in various lengths and sizes. The contact ends are inserted into the circuit board and riveted in place, allowing a permanent connection to be made. Pre-crimped leads are also used to connect components to provide a continuous electrical path. Unlike jumper wires, these pre-crimped leads cannot be adjusted and offer a more permanent solution to a circuit connection.

Jumper wires and pre-crimped leads are both essential tools in electronics engineering. Both types of wires offer quick and easy ways to make secure connections in circuits. Jumper wires are used in testing and prototyping, while pre-crimped leads are usually used for more permanent connections. Both types of wires are also used to make sound-proof connections and protect the circuit board from electrical noise.

The specific data is subject to PDF, and the above content is for reference