0502128000-04-G1

Jumper Wires

Jumper wires, also known as ‘jumps’, are a short length of pre-wired, insulated, and color-coded wire used for applications such as connecting two adjacent pins on a single chip or two points on a circuit board. In some cases, they also assist in connecting components like resistors, capacitors and transistors. Jumper wires are a type of lead commonly used in the electronics and telecommunications industries, as they make connections quicker and easier. The ends of the jumper wires may also be crimped, soldered, or taped onto the components.

0502128000-04-G1 Application Field and Working Principle

The 0502128000-04-G1 is a type of pre-crimped lead used for the electronics and telecommunications industries. This lead typically consists of three wires: a galvanized steel core for the signal, an insulating sleeve for insulation and a plastic copolymer jacket for reinforcement. The wire is threaded through the insulating sleeve and then crimped onto the pin of the device or circuit board. Crimping allows for a secure connection that will not come loose or separate. The insulation not only protects the device from damage but also makes soldering easier and safer.

The 0502128000-04-G1 pre-crimped lead is designed to be used in circuits with high current-carrying capacities, such as power supplies and relays. The wires are designed to withstand extreme temperatures, so they can be used in both indoor and outdoor applications. Thanks to its reinforced jacket, it is also resistant to abrasion and can withstand a high number of bends without breaking.

Pre-Crimped Leads

Pre-crimped leads, or leads with pre-crimped ends, areelectronic components which have a metallic core that is crimped to a device or a printed circuit board (PCB). This method of connection is faster and simpler than traditional soldering and provides improved reliability and durability. The pre-crimped leads can be used in a wide range of applications such as automotive, telecommunications, energy, medical, and aerospace. Pre-crimped leads are typically small in size, making them suitable for use in tight spaces. They are also less prone to corrosion, as the crimping process seals the connection to prevent moisture from entering the joint.

Pre-crimped leads are typically made from either copper or nickel-plated copper depending on the application. The core material is then insulated with a polyvinyl chloride (PVC) sleeve. This is usually colored in order to better identify the various wires in the connection. The lead is then crimped to the device or PCB by a process known as cold termination in which the leads are crimped onto the pins in the device or PCB.

Pre-crimped leads are a reliable and cost-effective connection solution and they are quickly becoming the standard in the electronics industry. This is in part due to the fact that they are more efficient and easier to use than soldering and they can be applied to devices with limited space such as handheld devices and slim circuit boards. Additionally, pre-crimped leads require less maintenance and are more durable than soldered connections.