0FLQ.400HXR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are a common type of electrical safety device used on current circuits. 0FLQ.400HXR fuses provide reliable protection against power problems and allow the user to control the level of current in their circuits. It is important to understand the application field and working principle for a fuse, in order to use it correctly and safely.

Application Field

0FLQ.400HXR fuses are used in both residential and commercial applications. They can be used in electrical systems to protect against overload, short circuit, or electrical shock. This type of fuse is often used in automotive, construction, and industrial applications as a safety feature. It is also used in medical equipment, home appliances, and other consumer electronics.

The 0FLQ.400HXR fuse is a slow-blow type fuse which is designed to be used in AC circuits. This fuse is rated for 250 volts and can handle currents up to 400A. It is available in a variety of sizes, including 6 x 32mm, 6 x 38mm, and 6 x 40mm. This type of fuse is also designed to meet UL 248-14, IEC 60269-2, and CSA-C22.2-no. 248 requirements.

Working Principle

The 0FLQ.400HXR fuse works on the principle of Joule heating. When the current passing through the fuse exceeds the current ratings, the fuse wire gets heated due to the resistance. The heat generated will eventually melt the fuse wire and interrupt the circuit. This is known as “blowing” the fuse. It can take several seconds or minutes depending on the level of overload.

The 0FLQ.400HXR fuse is designed to not blow under normal working conditions. This type of fuse is constructed with a slight voltage drop, which is intended to help prevent nuisance blowing. A fuse will blow once the current exceeds its ratings which means that it will not go off until the fault has caused damage to the circuit.

Safety Consideration

When using a 0FLQ.400HXR fuse, it is important to remember that it is designed to be used in AC circuits. If the fuse is installed in a DC circuit, it can cause a short circuit. It is also important to use the proper size fuse for the application. A fuse that is too large can allow the circuit to overload, whereas a too small fuse can blow frequently.

Additionally, the fuse should always be installed in an approved holder or enclosure. The holder or enclosure can help protect the fuse from moisture or physical damage. It can also help reduce the risk of electric shock.

Conclusion

The 0FLQ.400HXR fuse is a reliable and effective electrical safety device. It is designed to be used in AC circuits and is rated to handle up to 400A of current. It is important to understand the application field and working principle of this type of fuse in order to use it correctly and safely. In addition, it is also important to use the correct size fuse and install it in an approved holder or enclosure in order to ensure proper operation.

The specific data is subject to PDF, and the above content is for reference