1.5SMC15A M6G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Diodes

The 1.5SMC15A M6G is an unidirectional component of a type of TVS - diodes. These components are ideal for applications such as overvoltage protection and EMI/RFI suppression. They are used when protection for electromagnetic interference (EMI) or radio frequency interference (RFI) is desired. They are also commonly used for transient suppression and snubber applications.

TVS - Diodes are also sometimes referred to as transient voltage suppressors, TVS diodes, or just RFI/EMI protective components. They are unidirectional devices, which means they only allow current to flow in one direction. This makes them ideal for transients, as only a single-direction of voltage can cause any disturbances.

The 1.5SMC15A M6G is specifically designed to be an ultra low capacitance and low leakage protection devices. It can operate at a maximum of 15A of peak current and 600 volts of reverse standoff voltages. Its peak pulse power rating is 3400 Watts. This diode offers a high rate of response at minimum capacitance of just 0.7pf.

The working principle of TVS - Diodes is simple. When a voltage greater than a specified range is applied, the diode turns the current from the signal source. In other words, the diode simply acts as a short circuit which quickly limits the voltage before it could cause any damage. This limits any noise or current disturbances, allowing the system to remain protected.

In application, TVS - diodes are usually connected in series with the source device. This allows the diode to clearly discriminate between normal and transient pulses while efficiently protect the system from any surges. TVS - diodes are thus vital components for systems in high voltage, high current, low current, and all EMI and RFI conditions.

In summary, the 1.5SMC15A M6G is an ultra low capacitance and low leakage protection device of the TVS – diodes family. These types of diodes are ideal for applications that require protection from EMI or RFI, transients, and snubber applications. They are capable of handling peak currents up to 15A and reverse voltage of 600V, while offering a high rate of response and a minimum capacitance of 0.7pf. They operate by quickly limiting voltages from signals sources greater than a certain amount, protecting the system from any disturbances caused by these extraneous signals.

The specific data is subject to PDF, and the above content is for reference