1330-60J

DC Resistance (DCR):	4.5 Ohm Max
Height - Seated (Max):	0.145" (3.68mm)
Size / Dimension:	0.313" L x 0.115" W (7.95mm x 2.92mm)
Supplier Device Package:	--
Package / Case:	2-SMD
Mounting Type:	Surface Mount
Inductance Frequency - Test:	2.5MHz
Operating Temperature:	-55°C ~ 105°C
Ratings:	--
Frequency - Self Resonant:	20MHz
Q @ Freq:	35 @ 2.5MHz
Series:	1330
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	110mA
Tolerance:	±5%
Inductance:	47µH
Material - Core:	Ferrite
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors: 1330-60J Application Field and Working Principle

Fixed inductors are electrical components used in electronics for a variety of tasks. Their primary purpose is to store, control, or convert electrical energy. The most common applications for fixed inductors are in switching power supplies, audio equipment, computer power supplies, and motor drives.The 1330-60J is a type of rectangular fixed inductor. This is a 4-pin device with two pins as connection points, one pin for ground, and the fourth pin as an output level. Additionally, the 1330-60J has a rated current of 0.8 Amps. Its max temperature is 75°C, and its rated inductance ranges from 10 to 330 µH. The 1330-60J is used in power supplies and other similar applications.The working principle of the 1330-60J fixed inductor is based on electromagnetic induction. Electromagnetic induction occurs when an electric current flows through a coil that has an open magnetic core. As the current flows, it produces a magnetic field which is then transformed into electrical energy produced by the inductor.The 1330-60J consists of four separate windings, each of which have a separate set of pins connected. The first winding is connected to the power source, while the second is connected to the output. The third winding is the inductor itself and the fourth winding is connected to ground.When a current is applied to the 1330-60J, it produces an inductive reactance which opposes the change in current. This means that when current is applied to the first winding, the second winding will produce a voltage that’s a fraction of the original current due to the inductive reactance. As this current is then distributed throughout the second winding, it produces a more uniform voltage output.In conclusion, the 1330-60J fixed inductor is an essential component used in many applications. This device is used to store, control, or convert electrical energy based on the principle of electromagnetic induction. When current is applied, the 1330-60J produces an inductive reactance which opposes the change in current, resulting in a more uniform voltage output.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description