1557760000

Voltage - UL:	300V
Insulation Height:	1.059" (26.90mm)
Contact Tail Length:	--
Housing Material:	Polybutylene Terephthalate (PBT)
Contact Material:	Copper Alloy
Wire Strip Length:	7mm
Torque - Screw:	0.4-0.5 Nm (3.5-4.4 Lb-In)
Screw Size:	M2.5
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	-50°C ~ 100°C
Color:	Orange
Wire Gauge or Range - mm²:	0.2-2.5mm²
Wire Gauge or Range - AWG:	12-26 AWG
Series:	Omnimate BL
Current - UL:	10A
Voltage - IEC:	400V
Current - IEC:	15A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw - Clamping Yoke (Tension Sleeve)
Plug Wire Entry:	270°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	6
Number of Positions:	6
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks – headers, plugs and sockets are commonly used in both industrial and home applications where an electrical connection needs to be established. In the original form they are used to join conductors, such as wires, together in a more secure manner than is possible using a soldered joint.In the industrial environment terminal blocks are used for a wide variety of different applications; examples include the connection of wiring looms in industrial control systems, such as PLC’s (programmable logic controllers) and the wiring of motors. They are also becoming increasingly common in domestic applications, such as the control and wiring of security systems, home entertainment systems and other equipment.Terminal blocks typically consist of a mounting device, such as a mounting plate or a flange, which is used to fasten the block to an appropriate surface or mounting structure, such as the instrumentation panel. This is typically followed by a connection block which contains either a row of screw terminals or pins which are used to connect wiring. Finally, the connection block is attached to a wire bridge block which allows multiple wires to be connected easily without the need for additional wiring. Terminal blocks are typically classified into two groups according to their purpose, namely “ Power Connectors” or“ Signal Connectors”. Power connectors are designed to support the connection of larger electrical circuits, from several amps up to several hundred amps. They can be further separated into two types, such as single and multiple pole connectors, which are designed to carry different levels of current. Single pole connectors are capable of carrying currents up to 16 amps, while multiple pole connectors can support currents up to 65 amps. Furthermore, power connectors are typically equipped with auxiliary accessories such as fuses and circuit breakers, which provide additional safety and protection from overloads and short-circuits. Signal connectors, on the other hand, are designed to carry smaller electrical currents and signals. Examples include thermocouples, RTDs and current loops which are used to measure temperature, pressure and other physical quantities.Signal connectors are typically designed with just two poles, which provide adequate electrical connections for the low current signals used for sensing. They also typically have clamps or textured surfaces for better contact between mating surfaces, and may also be equipped with built-in self termination features and other special features to ensure a secure and reliable connection between mating components.In addition to the different types of terminal blocks, there are also a variety of different accessories available to complement and enhance the performance of the blocks. These include terminal blocks, insulating covers, test pins, test plugs, and “Jumper” plugs which are used to bypass unused terminals. Finally, the most important consideration for terminal blocks is providing a secure, reliable connection for the application in question. When selecting a terminal block for a particular application, it is important to consider the type of connection that is required and to select the appropriate terminal block according to the current and voltage needs of the application. In conclusion, terminal blocks – headers, plugs and sockets are essential components in both industrial and home applications, allowing a reliable and secure connection between conductors. While selecting a terminal block for a given application, it is important to consider the current and voltage requirements and choose the right components for the application. The variety of available accessories and their ability to provide extra protection further ensure secure and reliable connections in electrical systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description