15ETH06

Diodes - Rectifiers - Single

• 15ETH06 Application Field and Working Principle

The 15ETH06 is a single phase rectifier diode with a maximum blocking voltage of 600V and 175A peak current. It is available in a surface-mounted TO252W-5L package (Houser) and is widely used in high output industrial applications such as switched-mode power supplies, AC adapters, and industrial motors. The diode has both negative and positive temperature coefficients making it capable of operating in wide temperature ranges.

A rectifier diode is an electronic component that permits current to flow in one direction while blocking the opposite current direction. It is essential for converting alternating current (AC) to direct current (DC). The 15ETH06 diode has a built-in forward voltage drop in both directions. This property enables it to convert alternating voltage sources into a form that can be used by DC consumers.

A rectifier diode works by allowing current to flow through it only in one direction. The forward direction is from the anode to the cathode, and the reverse direction is blocked by the diode’s junction. Under forward bias, electrons in the n-type material will flow from the anode to the cathode, whereas holes in the p-type material will flow from the cathode to the anode. The electric current will, thus, only be able to flow in one direction.

The 15ETH06 has a maximum reverse recovery time of 15 nanoseconds and minimum breakdown voltage of 700V, making it suitable for high power applications. It also has an internal resistance of 1 Ohm along the positive terminal. The diode also features an improved temperature performance, allowing it to work in temperature ranges of -55°C to +175°C.

In order to apply the 15ETH06 in an actual application, a circuit board will most likely be used. To begin, the negative and positive power sources will be connected to the board with the use of wires. The diode can then be mounted on the circuit board and connected to the soldered power sources. In order to properly connect the diode, the user must ensure that the anode is connected to the negative voltage source. The diode will then be secured on the circuit board using chemical glue so that it does not have any external connection.

In conclusion, the 15ETH06 rectifier diode is a powerful electronic component suitable for high output industrial applications. Its fast reverse recovery time and wide temperature range enables it to be used in various situations. Once connected to the circuit board, the diode will help convert AC to DC, allowing the user to use the DC output for powered systems.