15SQ060

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are an important class of electronic components used as regulators, rectifiers, signal processors, signal converters, switches, and light emitters. Rectifiers are a type of diode that allow current to flow in one direction only. Single diodes are the most common type of rectifier, and the 15SQ060 is a single diode commonly used in power supply designs due to its high current capacity, fast switching speed and low forward voltage drop.

In applications that require rectification of alternating current (AC) power, the 15SQ060 is suitable for use in both half and full bridge rectification circuits. It is also used in buck-boost switching mode power supply designs requiring synchronous rectification, such as server power supplies. The diode also finds use in motor controllers, as a rectifying diode in power factor correction circuits, and in power supply designs that require a large number of paralleled rectifiers.

The 15SQ060 has a forward voltage drop (Vf) of 1.2V, which is slightly higher than other rectifiers in its class. However, its ratings of 60A, 400V make it suitable for high-current applications. The diode also features fast switching times, with a reverse recovery time (trr) of 8ns. This feature enables higher switching frequencies, resulting in better efficiency in power converter designs.

Additionally, the 15SQ060 is featured by an integrated leads and holder for easy mounting to a PCB, further simplifying its integration into power circuits. The diode package is available in the TO-220 package, making it ideal for use in high current and high temperature applications. It also meets the UL 94V-0 flammability rating for circuit board use.

The working principle of the 15SQ060 is based on the phenomenon of forward bias reverse breakdown. When a forward bias voltage is applied to the diode terminals, the voltage is not applied to the junction between the two semiconductor layers. As the forward bias increases, the current flow through the diode increases until the junction reaches its breakdown voltage, usually between 5 and 12V. When this occurs, the voltage across the diode will then quickly increase and exceed the forward bias voltage, causing an avalanche breakdown. This allows the diode to have both a high current capacity and a low drop across it.

The other important aspect of a diode’s working is its reverse breakdown voltage. This voltage is the voltage required to cause a reverse breakdown current in the diode, usually around 5 volts. In the reverse direction, the current flow through the diode is much smaller and is limited by the breakdown voltage. This is the reason why rectifiers are used in power supply circuits, because it allows for the conversion of alternating current to direct current without dissipating a large amount of energy.

In conclusion, the 15SQ060 is a single diode suitable for a wide range of rectification, switching mode and power factor correction applications. It offers high current capacity, fast switching speed, low forward voltage drop and integrated leads, making it an ideal component for power supply design.

The specific data is subject to PDF, and the above content is for reference