1736933

Series:	COMBICON GMSTB
Packaging:	Bulk
Part Status:	Active
Type:	Plug, Female Sockets
Number of Positions:	12
Positions Per Level:	12
Number of Levels:	1
Pitch:	0.300" (7.62mm)
Header Orientation:	--
Plug Wire Entry:	180°
Termination Style:	Screw - Clamping Yoke (Tension Sleeve)
Mounting Type:	Free Hanging (In-Line)
Current - IEC:	12A
Voltage - IEC:	1kV
Wire Gauge or Range - AWG:	--
Wire Gauge or Range - mm²:	0.2-2.5mm²
Color:	Black
Operating Temperature:	--
Contact Mating Finish:	Tin
Features:	Retention Latches (Non-Wire Side)
Material Flammability Rating:	UL94 V-0
Ingress Protection:	--
Screw Size:	M3
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Wire Strip Length:	7mm
Contact Material:	--
Housing Material:	Polyamide (PA), Nylon
Contact Tail Length:	--
Insulation Height:	0.591" (15.00mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks – Headers, Plugs, and SocketsTerminal blocks are used for wiring together two or more components with wire circuitry. They provide a safe and secure connection to prevent accidental wiring of components. They are the most common type of terminal used in electrical and electronic systems and are found in a wide variety of applications.The basic components of a terminal block include a connector or header with contacts or pins that connect the wire, a base or body that houses the contacts, and a connecting terminal. Depending on the type of terminal block, additional components may be added to give additional features such as a spring clip that locks the wire in place, a terminal bridge or jumper to connect two or more terminals, and a mounting plate or bracket and screws for fixing the terminal block in its mounted position.Terminal blocks can be divided into two main types – headers, plugs, and sockets. Headers are used to hold the various components of the terminal block together. These consist of a metal base which can be cut to the desired length, a number of contact points or pins that are soldered to the base, and a connecting terminal that can be soldered or screwed to the contact pins. Plug and sockets are the connectors used to connect the terminal blocks to the components themselves. These consist of a plug housing that enables the connection of wires to the terminals, plus a socket that slides inside the plug to make the connection.The working principle of terminal blocks relies on the physical contact between the connectors that the wires are connected to. This ensures that the electrical signals pass through the connector without any interference. The contacts or pins are made of metal so they can conduct electricity. The wires are then pushed into the contacts and held in place by the base or body of the terminal block. The combination of the contact pins and the base allow the wires to be securely fastened so that a good electrical connection is achieved.Terminal blocks are used in a variety of applications that range from small electronic products to large industrial equipment. In consumer electronics, they are used for connecting devices such as mobile phones, digital cameras, and MP3 players. In industrial applications, they are used for controlling machinery, including pumps, motors, and switches. They can also be used for lighting or signal control.Terminal blocks are also used in the automotive industry, where they are used to connect various components in the car’s electrical system. In marine applications, they are used to control and connect all of the various electrical components and systems on a boat.Terminal blocks are also used in aerospace and defense applications. They are used to control the various components of aircraft, including fuel and temperature controls, engine and navigation systems, and other components. In the military, they are used for controlling radar systems and communications.Terminal blocks are also used in medical applications, such as connecting electrodes and probes for monitoring and diagnostics. They are also used in industrial control systems, for connecting sensors, controllers, and motors.Terminal blocks are available in a variety of sizes, materials, and configurations. Different types of materials can be used to improve performance, including copper, aluminum, steel, and stainless steel. There are also a variety of connectors available, such as spring clip, wire-wrap, and crimp connectors.Terminal blocks offer a reliable and durable solution for connecting components in electrical and electronic systems. Their ease of installation and maintenance make them ideal for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description