1751100000

Voltage - UL:	300V
Insulation Height:	0.492" (12.50mm)
Contact Tail Length:	--
Housing Material:	Polybutylene Terephthalate (PBT)
Contact Material:	Copper Alloy
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Mating Flange
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Orange
Wire Gauge or Range - mm²:	0.35-0.5mm²
Wire Gauge or Range - AWG:	20-22 AWG
Series:	Omnimate BL
Current - UL:	7A
Voltage - IEC:	250V
Current - IEC:	6A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	IDC
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.138" (3.50mm)
Number of Levels:	1
Positions Per Level:	3
Number of Positions:	3
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1751100000 Terminal Blocks – Headers, Plugs and SocketsTerminal blocks are the connectors used in the electrical and electronic industry for connecting wires or cables. These components come in a variety of shapes and sizes, ranging from large multi-conductor blocks used in motor control, to miniature individual single-pole/single-throw (SPST) switches. The type of terminal block used in an application will depend on the element being controlled, its voltage requirements, current carrying capacity and other environmental factors.They are available in many different types, including headers, plugs and sockets; pin headers, terminal strips and screw terminal blocks; jacks and sockets; and multi-conductor cable assemblies. The connector type can also be determined by the application and the electrical and environmental requirements.Headers, Plugs & SocketsHeaders, plugs and sockets are the traditional type of electrical connector used in a variety of applications. These connectors are usually designed for a specific type of equipment and will fit a wide range of devices. They are typically wired by inserting the plug or socket into the corresponding header or block.Headers and sockets are a male and female plug and socket combination that allows connection of two devices. This is typically used in applications where the connection needs to be quickly disassembled and connected again; such as when connecting equipment to a power supply or when connecting a device to a computer port.Pin headers are used to connect wires to printed circuit boards. The connection is usually made using a solder. These are the most common type of headers used and are specifically designed for use on printed circuit boards.Terminal strips are a type of connector that is designed to accept two or more wires for connection. This type of connector is usually installed on the surface of a printed circuit board. They are commonly seen in the automotive industry, where they are used to connect power wires to the vehicle’s electrical system.Screw terminal blocks are a type of connector that is used to connect wires together. This type of block is generally designed to accept two or more wires. The connection is made using either a soldered connection or by attaching the terminal block to a screw. Jacks and SocketsJacks and sockets are a type of connector that is used to make a connection to devices such as television sets, computers, telephones, and audio equipment. They are designed to be plugged into a port, socket or a series of channels, which makes them ideal for various applications.These connectors are usually available in different shapes and sizes, depending on the application. They are typically secured to the device using screws, nuts or clips, which makes them suitable for use in harsher environments.Multi-Conductor Cable AssembliesMulti-conductor cable assemblies are used to connect multiple electronic devices. These assemblies are designed to simplify the connection of multiple wires or cables and are usually designed for use in environments that require high voltage or current carrying capacity.The cables are typically insulated and pre-drilled with holes to facilitate the connection of the cable’s end-connectors. This type of cable assembly is commonly used in the automotive, industrial, medical and military industries.ConclusionTerminal blocks are essential components used in the electrical and electronic industry for making connections. They come in a variety of types, including headers, plugs and sockets; pin headers, terminal strips and screw terminal blocks; jacks and sockets; and multi-conductor cable assemblies. The type of block used in an application will depend on the element being controlled, its voltage requirements, current carrying capacity and other environmental factors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description